Page 1 of 3
powet of an standard S14?
Posted: Fri Jun 08, 2007 7:44 am
by dwayne
howzit guys! whats the Std KW a S14 pushes out?

Posted: Fri Jun 08, 2007 8:14 am
by Gary57
160Kw if Im not mistaken
Posted: Fri Jun 08, 2007 8:38 am
by dwayne
so what kw would you say should i push out if the exhaust changed to 76mm boosting 0.7bar cone filter.. 170kw?
Posted: Fri Jun 08, 2007 8:40 am
by The Calibrator
Factory rating is 150kw flywheel
They make between 125kw and 135kw stock on the dyno I use.
Posted: Fri Jun 08, 2007 9:35 am
by dwayne
so i can get about 137-140kw on the weels?
Posted: Fri Jun 08, 2007 12:16 pm
by Phinx
Didn't brenwin give you the dyno graph?
I think it made 138 kw at 0.8 with the exhaust...
Posted: Sat Jun 09, 2007 8:44 am
by dwayne
ooo yes he actualy did it did 134kw with the old 57mm exhaust . he fitted a 76mm on 2 weeks before i bought it!
Posted: Sat Jun 09, 2007 11:41 am
by qewrty
dwayne wrote:ooo yes he actualy did it did 134kw with the old 57mm exhaust . he fitted a 76mm on 2 weeks before i bought it!
get a chip or something so it can be tjooned.
is this your first turbo car dwayne? any chance of joining us at tarlton thursday night for a few runs?
phinx, start getting out of standby now already for thursday night. i'll meet you at the N14. there were between 5 and 10 cars running last week, so the queue is really short.
i'll post my latest dyno hopefully a bit later. i actually have a few dyno sheets now, first one was just before i took the car to calibrator. it was doing 124kw. The turbo was 140k kms old and it was running very lean..
Posted: Sat Jun 09, 2007 3:26 pm
by The Calibrator
phinx, start getting out of standby now already for thursday night.
Tarlton is every 2nd Thursday night.
Posted: Sat Jun 09, 2007 3:45 pm
by qewrty
The Calibrator wrote:phinx, start getting out of standby now already for thursday night.
Tarlton is every 2nd Thursday night.
now thats what i call a spoiler
Posted: Mon Jun 11, 2007 7:35 am
by dwayne
no not the first one! had a uno turbo audi a3 1.8 t golg 4 gti and now the sx! tarlton is a bit far from home im from the east rand!
Posted: Mon Jun 11, 2007 1:33 pm
by Phinx
It was 128 RWKW before exhaust and is was 134 RWKW after the exhaust
Posted: Mon Jun 11, 2007 2:35 pm
by dwayne
thanks! so how much power can a chip make?
Posted: Wed Jun 13, 2007 8:53 am
by veecee
dwayne wrote:thanks! so how much power can a chip make?
probably in the region of 150rwkw's on your "butt" dyno!!!!

Posted: Wed Jun 13, 2007 10:54 am
by dwayne
ok and where can i get hold of an chip?