powet of an standard S14?

dwayne · Post by **dwayne** » Fri Jun 08, 2007 7:44 am

howzit guys! whats the Std KW a S14 pushes out?

Gary57 · Post by **Gary57** » Fri Jun 08, 2007 8:14 am

160Kw if Im not mistaken

dwayne · Post by **dwayne** » Fri Jun 08, 2007 8:38 am

so what kw would you say should i push out if the exhaust changed to 76mm boosting 0.7bar cone filter.. 170kw?

The Calibrator · Post by **The Calibrator** » Fri Jun 08, 2007 8:40 am

Factory rating is 150kw flywheel
They make between 125kw and 135kw stock on the dyno I use.

dwayne · Post by **dwayne** » Fri Jun 08, 2007 9:35 am

so i can get about 137-140kw on the weels?

Phinx · Post by **Phinx** » Fri Jun 08, 2007 12:16 pm

Didn't brenwin give you the dyno graph?
I think it made 138 kw at 0.8 with the exhaust...

dwayne · Post by **dwayne** » Sat Jun 09, 2007 8:44 am

ooo yes he actualy did it did 134kw with the old 57mm exhaust . he fitted a 76mm on 2 weeks before i bought it!

qewrty · Post by **qewrty** » Sat Jun 09, 2007 11:41 am

dwayne wrote:ooo yes he actualy did it did 134kw with the old 57mm exhaust . he fitted a 76mm on 2 weeks before i bought it!

get a chip or something so it can be tjooned.

is this your first turbo car dwayne? any chance of joining us at tarlton thursday night for a few runs?

phinx, start getting out of standby now already for thursday night. i'll meet you at the N14. there were between 5 and 10 cars running last week, so the queue is really short.

i'll post my latest dyno hopefully a bit later. i actually have a few dyno sheets now, first one was just before i took the car to calibrator. it was doing 124kw. The turbo was 140k kms old and it was running very lean..

The Calibrator · Post by **The Calibrator** » Sat Jun 09, 2007 3:26 pm

phinx, start getting out of standby now already for thursday night.

Tarlton is every 2nd Thursday night.

qewrty · Post by **qewrty** » Sat Jun 09, 2007 3:45 pm

The Calibrator wrote:
phinx, start getting out of standby now already for thursday night.
Tarlton is every 2nd Thursday night.

now thats what i call a spoiler

dwayne · Post by **dwayne** » Mon Jun 11, 2007 7:35 am

no not the first one! had a uno turbo audi a3 1.8 t golg 4 gti and now the sx! tarlton is a bit far from home im from the east rand!

Phinx · Post by **Phinx** » Mon Jun 11, 2007 1:33 pm

It was 128 RWKW before exhaust and is was 134 RWKW after the exhaust

dwayne · Post by **dwayne** » Mon Jun 11, 2007 2:35 pm

thanks! so how much power can a chip make?

veecee · Post by **veecee** » Wed Jun 13, 2007 8:53 am

dwayne wrote:thanks! so how much power can a chip make?

probably in the region of 150rwkw's on your "butt" dyno!!!!

dwayne · Post by **dwayne** » Wed Jun 13, 2007 10:54 am

ok and where can i get hold of an chip?