CA18DET HP CAPABILITIES

Discussion of technical issues and ideas (engine, chassis)

Moderators: P3g4sus, Daniel, rat, Draco, Riekert

Post Reply
CHRISTO123
Slipping Clutch
Posts: 51
Joined: Sat Dec 04, 2010 10:21 pm
Car: S13
Location: Vereeniging
Contact:

CA18DET HP CAPABILITIES

Post by CHRISTO123 »

CAN ANYONE ASSIST WITH INFO FROM OWN EXPERIENCE . I NEED TO FIND OUT WHAT THE LIMITATIONS OF THE CA18DET ( 200 SX , S13 ) MOTOR IS , IN STOCK TRIM. WHAT BOOST CAN THE MOTOR SAFELY HANDLE . WHAT POWER CAN BE MADE REALISTICALLY . IS THEIR ANY SPECIFIC KNOWN WEAK POINTS THAT CAN BE SHARED WITH ME. REGARDS , CHRISTO
User avatar
Grobblere
0.6 Bar Boost
Posts: 681
Joined: Mon Jan 17, 2011 11:35 pm
Car: S13
Real Name: Eugene
Location: Centurion

Post by Grobblere »

What we like to do is to put a spacer in the oil pump to push up the oil pressure, we do this on the Sr20's and Ca18dets with great results.

I had a 115wkw 181 nm (uncorrected sr20 N/a) and my friends dad had a Ca18det with a hybrid t3/t4 which made around 340whp +- bakc in 2000 and did a 12@202km with semis in a datsun...seemed to work well for him 2 :D

Try it :)
User avatar
djtreble
Over Boosting
Posts: 1502
Joined: Fri Jan 29, 2010 2:49 pm
Car: S13
Location: Cape Town

Post by djtreble »

I ran 350bhp on a stock CA without any issues on the limits sideways all the time.

As long as you look after the engine, service it and keep everything cool and in check you can run up to 350 without any major issues.
Image

Distributor for ROTA wheels South Africa

www.rotawheels.co.za
www.kaihatsu.co.za
User avatar
Charlvdw
200SX Maniac
Posts: 3882
Joined: Wed Jan 09, 2008 10:08 am
Car: S13
Engine: SR
Location: Pretoria

Post by Charlvdw »

djtreble wrote:I ran 350bhp on a stock CA without any issues on the limits sideways all the time.

As long as you look after the engine, service it and keep everything cool and in check you can run up to 350 without any major issues.
I would really like to see this. :shock:
User avatar
poizen
200SX Maniac
Posts: 2994
Joined: Sat Apr 12, 2008 2:05 pm
Car: S13
Engine: SR
Real Name: Mical Mackay
Location: Durban, New Germany

Post by poizen »

Charlvdw wrote:
djtreble wrote:I ran 350bhp on a stock CA without any issues on the limits sideways all the time.

As long as you look after the engine, service it and keep everything cool and in check you can run up to 350 without any major issues.
I would really like to see this. :shock:
same here the most i could get was 220 in stock besides a turbo
Image
Image
''enough rice to feed whole of china''
User avatar
Gary57
Club Rep
Posts: 5975
Joined: Thu Oct 12, 2006 12:56 pm
Car: S13
Location: Durban

Post by Gary57 »

I have run more than 255hp on the wheels for a good 4 years now, no problems so far. That is close to 300hp...
DriftZ: "I swear if a CA18 beats my SR im getting a RB!"
User avatar
poizen
200SX Maniac
Posts: 2994
Joined: Sat Apr 12, 2008 2:05 pm
Car: S13
Engine: SR
Real Name: Mical Mackay
Location: Durban, New Germany

Post by poizen »

Gary57 wrote:I have run more than 255hp on the wheels for a good 4 years now, no problems so far. That is close to 300hp...
yes but yours isnt std when i say std i mean from factory so std injectors etc
Image
Image
''enough rice to feed whole of china''
User avatar
Gary57
Club Rep
Posts: 5975
Joined: Thu Oct 12, 2006 12:56 pm
Car: S13
Location: Durban

Post by Gary57 »

Oh sorry thought he was asking about std internals. I did 162kw on the wheels with stock injectors and a unichip when I bought my car... That is the most I have seen. Other than that I would say 208hp on the wheels is the most.
DriftZ: "I swear if a CA18 beats my SR im getting a RB!"
User avatar
Charlvdw
200SX Maniac
Posts: 3882
Joined: Wed Jan 09, 2008 10:08 am
Car: S13
Engine: SR
Location: Pretoria

Post by Charlvdw »

Gary57 wrote:I have run more than 255hp on the wheels for a good 4 years now, no problems so far. That is close to 300hp...
Thats close to 300 yes but 350 is still a deep wallet away. And its you driving the car anyway.
H8rlequinb
0.2 Bar Boost
Posts: 245
Joined: Mon Nov 29, 2010 3:33 pm

Post by H8rlequinb »

Well I am running 204 KW atw with "stock" internals. Bolt on's pretty much all the way... I was promised forged however :evil: Damnit. Will soon find out what the limits are however since I will drive it like I stole it... see if it holds and then double the boost.
You aren't racing until your breaking shit... My SX is stuffed!!! Point proven ;)
User avatar
djtreble
Over Boosting
Posts: 1502
Joined: Fri Jan 29, 2010 2:49 pm
Car: S13
Location: Cape Town

Post by djtreble »

Appologies, obviously I was running bigger injectors, oil cooler, huge GT2876R, Exhaust, Walbro, Wraped Mainfold, FMIC, mapped, etc but the engine internals were stock. Even the cams were stock.
Image

Distributor for ROTA wheels South Africa

www.rotawheels.co.za
www.kaihatsu.co.za
CHRISTO123
Slipping Clutch
Posts: 51
Joined: Sat Dec 04, 2010 10:21 pm
Car: S13
Location: Vereeniging
Contact:

Post by CHRISTO123 »

djtreble wrote:Appologies, obviously I was running bigger injectors, oil cooler, huge GT2876R, Exhaust, Walbro, Wraped Mainfold, FMIC, mapped, etc but the engine internals were stock. Even the cams were stock.
THANX TO ALL WHOM HAVE SO FAR CONTRIBUTED ADVICE ! AGAIN , STOCK " MOTOR " IS WHAT I AM INTERESTED IN . WHAT MAX BOOST ? ANY SPECIFIC KNOWN WEAK AREAS OF THE CA18DET MOTOR IN " STANDARD " TRIM

REGARDS
CHRISTO
User avatar
aep886
SX Forumholic
Posts: 1881
Joined: Thu Aug 09, 2007 10:19 pm
Car: S14
Engine: SR
Real Name: Davey
Location: Bloemfontein

Post by aep886 »

Gary57 wrote:I have run more than 255hp on the wheels for a good 4 years now, no problems so far. That is close to 300hp...
255hp is over 300hp at the engine~!^^
current vehicles...
1979 Corolla SR5
1996 S14 200sx
Post Reply