S14 Discs

Daniel · Post by **Daniel** » Thu Sep 23, 2010 4:47 pm

I have searched on here I swear

Does anybody know the part numbers for S14/300ZX Front Discs? and where I could buy a new set from?

Some motherfcuker has stolen mine

(were not on the car at the time)

*EDIT

chuck in the S14/300ZX front pads part number in as well as what pads you recommend. Mine are FUBAR

300sx · Post by **300sx** » Thu Sep 23, 2010 6:21 pm

eish.. im sorry to be the bearer of bad news mate, but i have never found a local suplier of these spesific discs, besides the stealers ofc.. i dont think there is one..

the pads you should be able to find aftermarket though..

Daniel · Post by **Daniel** » Thu Sep 23, 2010 7:41 pm

Yeah stopped at a few places after work...not even listed

When i find that person they're dead!
*Free beer to the one who gives me an alibi

Neither the S14 or 300ZX was listed in the books for pads. Though I believe some Nissan Harbody pads fit...will take my old ones for a sample then.

n1smo200sx · Post by **n1smo200sx** » Thu Sep 23, 2010 7:58 pm

Hilux 2700 hi rider pads fit the 300zx/s14 front calipers.

godzilla · Post by **godzilla** » Thu Sep 23, 2010 7:59 pm

dude, my complete hubs and discs along with front calipers i had in store were stolen ,thats probably a good coupla grands worth of kit stolen eish bra i feel it with u.i wish a thousands hungry ants down the futher mukers pants who stole from u ,ag his ma se prosche fuckin thieves dudecoe right man. hope u

Daniel · Post by **Daniel** » Thu Sep 23, 2010 10:14 pm

Thanks guys.

Aah yes Mike that was it i remember now thank you.

So what do you S14/300ZX guys do when it comes time to replace?
I really really need discs

300sx · Post by **300sx** » Thu Sep 23, 2010 11:25 pm

i seem to recall power brake could supply upgraded kit, but it was more than the stealers..

if you shop real carefull (lowest price+best shipping) they can be bought of ebay for just over 1k each..

or do what i did, space the calipers out, and fit 330mmx30mm murano discs.

nirvash · Post by **nirvash** » Thu Sep 23, 2010 11:36 pm

300sx wrote:i seem to recall power brake could supply upgraded kit, but it was more than the stealers..

if you shop real carefull (lowest price+best shipping) they can be bought of ebay for just over 1k each..

or do what i did, space the calipers out, and fit 330mmx30mm murano discs.

sure there was a thread talking about the murano disks as an alternative earlier this year sometime....

aep886 · Post by **aep886** » Fri Sep 24, 2010 12:19 am

you can use Skyline disk... or do some upgrade... or check local scrap yard...

300sx · Post by **300sx** » Fri Sep 24, 2010 9:16 am

you can use Skyline disk

lol, and you reckon skyline discs are going to be easier to find than 300zx/s14 discs?

Daniel · Post by **Daniel** » Fri Sep 24, 2010 11:06 am

300sx wrote:i seem to recall power brake could supply upgraded kit, but it was more than the stealers..

if you shop real carefull (lowest price+best shipping) they can be bought of ebay for just over 1k each..

or do what i did, space the calipers out, and fit 330mmx30mm murano discs.

Thanks

Although I've definitely read that 330mm discs are too big for Z32 calipers, your supposed to use some R33 calipers for that. Im sure it fits, just not properly...but you will obviously know better than myself.

If I could find some 315mm M3 discs I'd use those, but they are just as hard to find. Havent asked the BM stealership yet, even with my huge discount there im sure it costs something crazy.

300sx · Post by **300sx** » Fri Sep 24, 2010 11:19 am

http://200sx.za.net/phpBB2/viewtopic.ph ... highlight=

murano discs are only 28mm thick, vs 30mm for the s13/z32 discs..

the biggest problem is finding discs that are 30mm thick.. not many out there, in any manufacturers catalog..

Daniel · Post by **Daniel** » Fri Sep 24, 2010 11:58 am

You legend! just a pitty the pics are no longer up.

In that thread the disc is 320mm not 330mm which is perfect!

I'l go have a look for those discs. The spacers however...argh...I have the manufacturing skills of a monkey but needs must

Skylinefreak · Post by **Skylinefreak** » Fri Sep 24, 2010 9:40 pm

Just head over to www.rezlo.com and check out the shop - pretty sure I saw some S14 discs in there somewhere. And Brembos as well.

Daniel · Post by **Daniel** » Fri Sep 24, 2010 11:17 pm

Yes thanx he does. But for R4 200 I would rather try the bigger disc option