Project: S13.4a 450SX

How-to's, project cars, and various other articles posted by club members

Moderators: P3g4sus, Daniel, rat, Draco, Riekert

Forum rules
Post Reply
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Project: S13.4a 450SX

Post by P3g4sus »

Hi Everyone
Thank you so much for all of the help with the headgasket and waterpump!
This weekend i pulled my motor out to rebuild it from scratch.

My biggest surprise though was the turbo... its a TB28... :D :D :D :D :D
But then came the bad news. Exhaust manifold has a huge crack in it! that needs replacing.
Im going to pull the head today. Then we will see in what condition the internals is in.

Thing about that turbo I got, when I bought the car it was boosting 0.7 bar.
Then I found this weekend the turbo was loose on the manifold, i could get a car key in between the turbo and the exhaust manifold and had just 2 nuts holding it on! and there is no gasket! Next thing. The exhaust manifold also had no gasket, and the bolts i could remove with my hands. Now my question. What would my car be able to boost with that turbo if everything was sorted? :D


Here is my baby the day I got her...

Image

Here is some pics of what happened the weekend, sorry about the quality of the images, it was taken from a phone!

Image
Image
Image
Image
Image
Last edited by P3g4sus on Thu Jan 20, 2011 12:24 pm, edited 3 times in total.
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
User avatar
Riekert
The Overlord
Posts: 9505
Joined: Tue Jul 31, 2007 11:51 pm
Car: S13
Engine: VQ
Real Name: Riekert
Location: Hermanus/Cape Town
Contact:
Contact Riekert

Post by Riekert »

eish...

Ive got a CA exhaust manifold for you.

and damn! just two bolts? not lekker
Enzio wrote:Who needs ligths? When you're going sideways forward facing lights don't do anything but confuse squirrels and sheep next to the road...


aka The Overlord
Top
User avatar
rat
Administrator
Posts: 5378
Joined: Sat Jun 30, 2007 10:38 am
Car: R32
Engine: RB
Real Name: Rat
Location: Margate

Post by rat »

Well done, made good progress in a weekend
Hot Plates are Sexy
Top
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Post by P3g4sus »

I just pulled the Head of now. There is definite oil and water mixture, but no break in the head gasket!?

but in any case, the head and the block goes in for reconditioning!
(as soon as the funds are there)

Thx rat, But i did all of that just the saterday Pulled the head now in my lunch break!

Very very bad carbon buildup!

Sleaves looks good, pistons looks good, now the big Q, Do i open up downunder or not? :roll:

Image

Image

Image

Image
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Post by P3g4sus »

And Riekert, Please get in contact with me, I want that manifold of yours, Pretty Please!
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
User avatar
mario_200sx
200SX Maniac
Posts: 2507
Joined: Fri Dec 14, 2007 9:16 am
Car: S13
Location: Cape Town

Post by mario_200sx »

My advise would be too pull off the sump and check the bearings. To be 100% sure I would take out the crank, send it in for polishing and replace the bearings with ACL race bearings. Bearing knocks on these CA18's happens allot...thats how my CA18 died!

Rather safe than sorry....I must say its nice seeing a CA18 in a S13 these days.....dont get them allot anymore! :lol: :lol:
Rolling Thunder..........
Top
User avatar
Riekert
The Overlord
Posts: 9505
Joined: Tue Jul 31, 2007 11:51 pm
Car: S13
Engine: VQ
Real Name: Riekert
Location: Hermanus/Cape Town
Contact:
Contact Riekert

Post by Riekert »

haha ya. like mario said... do the underside while your at it... don't be a idiot like me and just do the underside and not check the piston rings too... :oops: :oops:
Enzio wrote:Who needs ligths? When you're going sideways forward facing lights don't do anything but confuse squirrels and sheep next to the road...


aka The Overlord
Top
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Post by P3g4sus »

IM going to do that yes, but just 1 problem... In my excitement to pull the motor, i forgot to drain the oil... so once i can make a plan there, i wil open the sump...

I have a special plan with my CA18. Watch this space...
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
User avatar
mario_200sx
200SX Maniac
Posts: 2507
Joined: Fri Dec 14, 2007 9:16 am
Car: S13
Location: Cape Town

Post by mario_200sx »

Is it a "Spar" or "Pick & Pay" special? :shock:
Rolling Thunder..........
Top
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Post by P3g4sus »

Nice one Mario! Luckly not, Just a idea a little links van die regering!

Everyone goes to RB and SR, was my initial idea as well, but changed my mind.. Mobnes Thats my inspiration, just maybe not that much :P
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Post by P3g4sus »

Oky, so the whole motor is open, almost everything is getting replaced!

Here is a initial list of parts and work that needs to be done:

ACL bearings all round;
Eagle conrods;
Airias Pistons;
Crank balancing;
block reingeneering;
cometic headgasket;
head skimming & reconditioning & gasflow(maybe, maybe not);
Arp bolts;
Upside down exhaust manifold;
complete gasket set,(still deciding if i am going to do a original Nissan, or Payen);
New oil and water pump;
Still searching for a aftermarket intake manifold;
still deciding on throttle body
electric radiator fan;
bigger radiator;
nistune daughter board(type 1);
650 cc injectors;
aftermarket fuel rail from Mr turbo;
new cam pullies;
still deciding on what degrees for the intake cam;
stainless steel boost pipes;
aftermarket fuel pump;
fuel pressure regulator;
front mounted intercooler(550X230X65);
oil cooler;
aftermarket wastegate and dump valve( still deciding on type, make, ext);
Boost controller;
Turbo timer;
Heat wrap the manifold and down pipe;


Its a long build, about 6 months, so wil be putting on parts when the funds are there! will post pictures as i get the parts!

After the motor is done, then i can start on the rest of the car!

Comments on the parts is welcome!
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
User avatar
DriftZ
200SX Maniac
Posts: 2611
Joined: Mon May 05, 2008 7:48 pm
Car: S15
Engine: SR
Location: Durban

Post by DriftZ »

nice. Just check, i was told not to wrap my manifold, but from the downpipe out you can wrap up.
Top
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Post by P3g4sus »

Thx driftz, will do so then!
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
NIZAN-R
Over Boosting
Posts: 1201
Joined: Tue Jan 08, 2008 10:11 pm
Car: S13
Real Name: Renier
Location: PTA & Perth

Post by NIZAN-R »

:twisted: you wont be disapointed with the nistune value for money and eas of tuning.
That list is good all that You must get is z32 afm to finish it of.keep the CA18 alive
Image
She is not the CA that could be
She is the CA that IS
(O=O)/RS13\(O=O)
"if you only need one jack to raise your car, then your car isn't low enough"
"EVERYDAY I'M FLUTTERING!"
Top
User avatar
P3g4sus
Club Drifter
Posts: 2352
Joined: Wed Mar 03, 2010 12:23 pm
Car: Supra
Engine: 2JZ
Real Name: B.G. Smit
Location: Midrand

Post by P3g4sus »

Thx Nizan-R, I am doing just that, want to see what power I can get from the CA18!

I was wondering about the AFM, so thx, now i know, But wil it work for about 450whp?
Power is nothing without control,
Control is not fun without power.
Traction is over rated. :twisted:
Top
Post Reply

Return to “Articles”