SR20T slope top

veecee · Post by **veecee** » Fri Aug 07, 2009 1:24 pm

POWDER wrote:
veecee wrote:
Riekert wrote: *Cough* Did mine for R16k *Cough*
i meant with everything above board and legit! so all your shady dickwad girlpantz deals you made automatically exclude you!
Umm, I'm sitting at a total of R19100.00 as a total, This includes VVT Motor, 5 Speed Gearbox, Dictator FMS, Installation, Dyno & Possibly a new Radiator if I play my cards right, currently busy with the deal....

wait...

POWDER · Post by **POWDER** » Fri Aug 07, 2009 1:27 pm

wait... ???

Riekert · Post by **Riekert** » Fri Aug 07, 2009 1:35 pm

Well I got alot of help from Shane, he is a awesome guy!

Bought my motor from him.

Basically on R17k with motor, GT28RS turbo, IC, Piping, and ECU+wiring harness, fitment also.

but ja... still need to tune it

POWDER · Post by **POWDER** » Fri Aug 07, 2009 1:38 pm

Riekert wrote:Well I got alot of help from Shane, he is a awesome guy!

Bought my motor from him.

OK who is shane and where do I get hold of him ? [GRIN]

Riekert · Post by **Riekert** » Fri Aug 07, 2009 1:42 pm

hehe, he helped me parts wise... he did a RB conversion in his SX, so all the parts he didn't need I got. thus got the motor for a sweet deal plus a crap load of other stuff too.

mario_200sx · Post by **mario_200sx** » Fri Aug 07, 2009 3:30 pm

Management system wise. I would keep the stock management if possible. If you are gonna keep the motor stock for now there is no point in destroying the loom for a dicktator system.

I also have a S13 with a SR20DET VVT motor. But Im running different cams a few other mods. Tried making the stock system work but my loom was so hacked up I could get it running. So then I opted for the dicktator system.

Goch and Cooper did mine, however I dont think they install systems anymore. They will only tune it. Best bet after them would be Dynotec in Brackenfell.

If I where you, and this is what I wanted to do:
Go with the stock management system. Save up some cash and the first mod you do is buy the Apexi FC Commander management system. Best money you will ever spend!

Send it up to PE to Rezlo (Ian) to get it tuned. Then start to mod your SX. It will save you loads of headache and cash! Just do yourself a favour and read up on the Apexi system and speak to some guys that already have it on their cars.

Dont get me wrong, dicktator is a great local system. I cant complain, except for the cold start that needs to be worked on a bit.

Just my 2c...

POWDER · Post by **POWDER** » Fri Aug 07, 2009 4:01 pm

veecee wrote:
POWDER wrote:
veecee wrote: i meant with everything above board and legit! so all your shady dickwad girlpantz deals you made automatically exclude you!
Umm, I'm sitting at a total of R19100.00 as a total, This includes VVT Motor, 5 Speed Gearbox, Dictator FMS, Installation, Dyno & Possibly a new Radiator if I play my cards right, currently busy with the deal....
wait...

OK, I now have confirmation of pricing, I am not going to be paying R19100 after all, and not getting a new Radiator either, but I will be paying as low as R17500 for everything I mentioned before excl. Radiator . . . .

I dont think that is bad going hu ????

Riekert · Post by **Riekert** » Fri Aug 07, 2009 5:17 pm

POWDER wrote: OK, I now have confirmation of pricing, I am not going to be paying R19100 after all, and not getting a new Radiator either, but I will be paying as low as R17500 for everything I mentioned before excl. Radiator . . . .

I dont think that is bad going hu ????

Not to bad. especially if the motor is still in a good condition.

mario_200sx wrote:Management system wise. I would keep the stock management if possible. If you are gonna keep the motor stock for now there is no point in destroying the loom for a dicktator system.

I also have a S13 with a SR20DET VVT motor. But Im running different cams a few other mods. Tried making the stock system work but my loom was so hacked up I could get it running. So then I opted for the dicktator system.

Goch and Cooper did mine, however I dont think they install systems anymore. They will only tune it. Best bet after them would be Dynotec in Brackenfell.

If I where you, and this is what I wanted to do:
Go with the stock management system. Save up some cash and the first mod you do is buy the Apexi FC Commander management system. Best money you will ever spend!

Send it up to PE to Rezlo (Ian) to get it tuned. Then start to mod your SX. It will save you loads of headache and cash! Just do yourself a favour and read up on the Apexi system and speak to some guys that already have it on their cars.

Dont get me wrong, dicktator is a great local system. I cant complain, except for the cold start that needs to be worked on a bit.

Just my 2c...

Ditto on what mario said.

I'm running stock management for now too... but would love to get the Apexi comander... but eish... R10k is alot of cash....

POWDER · Post by **POWDER** » Sat Aug 08, 2009 7:53 pm

AAAArrrrgggg, The blooming guy said when I got there that he was quoting me on a dang Red top. Although then have got a front cut for me for R17000.... Aaaarrrgggg still, this grates my @$$ . . .

veecee · Post by **veecee** » Tue Aug 11, 2009 7:31 am

thats what i meant. soz dude.

POWDER · Post by **POWDER** » Tue Aug 11, 2009 8:11 pm

veecee wrote:thats what i meant. soz dude.

Ha ha ha, Dang you Murphy.... O well, I'm still getting SR20-DET with Gearbox and Dicktator for like R15 800 so that's cool enough for me...

Thanks for the heads up anyway VC

antman · Post by **antman** » Tue Aug 25, 2009 8:00 am

Hey Powder, how is the conversion going? What motor have you eventually gone for? I will be starting mine in the next couple of weeks. Have you any cautions you could throw my way.
Cheers
Tony

Riekert · Post by **Riekert** » Tue Aug 25, 2009 8:02 am

antman wrote:Hey Powder, how is the conversion going? What motor have you eventually gone for? I will be starting mine in the next couple of weeks. Have you any cautions you could throw my way.
Cheers
Tony

Awesome dude!!

antman · Post by **antman** » Thu Sep 03, 2009 6:21 am

Hi guys, well the s14 vvt front cut is ordered and will take 14 days to get here and I can't wait, reminds me of the night before xmas years ago. Was wondering if any of you on the forum with the vvt motors are experiencing the dreaded vvt rattle. I hear there are many on the net complaining of this on both low and high mileage motors.
Many leave it and bear the noise and many replace the cam with a non vvt one.
Can aftermarket ECU's (local units) control the vvt properly when running higher boosts, I have heard that this cannot be done successfully.

POWDER · Post by **POWDER** » Wed Sep 09, 2009 10:00 pm

Hi Guys,

So this is how it is going so far, Antman, this should answer your question too.

The CA18DET & GB has been removed & the SR20DET + GB has been installed. Since the SR20 GB from Japan Auto didn't have a thrust bearing or spline ring, I used the ones from the CA18 GB.

What Motor did I end up going for? The Blacktop NON VVT, reason for this is that through some advice I found out parts for the VVT are a bit of a mission to get hold of. Went for the 5 Speed gearbox coz everyone sais the 6 speed is no good past 200KW.

Fit with no problem, mounts perfect.