FMIC and piping help needed

phoenix s14 · Post by **phoenix s14** » Wed Oct 01, 2008 11:54 pm

Hi guys,

On a recent visit to MR TURBO I found a 600mmx300mmx76mm intercooler and it looked really sweet. However I was told bigger is not always better and was told to rather use the 550mmx230mmx50mm one with the 50mm as hot pipes and 60mm as cold pipes increasing to 76mm

I am confused since the Greddy bolt-on uses 50-60mm hot pipes, a 600mmx280mmx76mm intercooler and then 60mm cold pipes increasing to 76mm at the Throttle body.

Note this is on a SR20 in a S14 with a bigger turbo running 0.9bar.

I REALLY dont want any more lag. Please help esp the local guru's please...

HancoB · Post by **HancoB** » Thu Oct 02, 2008 12:02 am

Get a small FMIC and get DevilsOwn!

phoenix s14 · Post by **phoenix s14** » Thu Oct 02, 2008 12:12 am

Noob response: HUH!?

Also when I get the new cooler who is the best to go to in Gauteng for piping (the neat stuff...) preferably ally and without seeing any welds and also not 101 pieces.

nice smooth dent-less bends and nice flowing pipe work.

HancoB · Post by **HancoB** » Thu Oct 02, 2008 12:15 am

No I'm being serious, you said you dont want lag, then get a small FMIC and run DevilsOwn with that! Its progressive so your small FMIC saves you the lag and DevilsOwn cools when boosting High!

I know of a certain s14 running higher boost than that and running DevilsOwn with no problems, and you wont believe the power he makes!

HancoB · Post by **HancoB** » Thu Oct 02, 2008 12:17 am

And on the piping get a set for the SR20DET.

Give Oscar at FSR a ring. He has loads of stock! It looks great as well and its made to fit.

phoenix s14 · Post by **phoenix s14** » Thu Oct 02, 2008 12:19 am

made to fit for FMIC??? Kewl if that's the case do you have contact details??? and where is he based?

Thanks really appreciate the help

HancoB · Post by **HancoB** » Thu Oct 02, 2008 12:24 am

He is based in CT but he ships to any where in SA!

Go look here, there you can see two SR20DET's with the piping he sells, and the coolers.

http://200sx.za.net/phpBB2/viewtopic.ph ... &start=210

veecee · Post by **veecee** » Thu Oct 02, 2008 5:55 am

he meant he doesnt know what devilsown is!!!

fark - i dont even know for sure - its watermerth cooling system right???

HancoB · Post by **HancoB** » Thu Oct 02, 2008 8:18 am

Jip, its a progressive water meth system, so many ways to set it up. I'm really thinking of getting that!

ReeceZ · Post by **ReeceZ** » Thu Oct 02, 2008 2:59 pm

Whats the retail at the moment on it Hanco, i'm also changin my intercooler soon, don't wana buy something that's gona make boost come in later than it already is.

Pinkfluffybunnys · Post by **Pinkfluffybunnys** » Thu Oct 02, 2008 3:09 pm

Aluminium Boost Pipes

--------------------------------------------------------------------------------

This Universal Aluminium Boost Pipe kit comprises of 2mm thick 76mm diameter pipes. Each kit includes 2x 45° bends, 2x 90° bends, 2x 180° bends and 2x 500mm straight pieces.

R850.00

http://www.gotboost.co.za/boostpipes.htm

HancoB · Post by **HancoB** » Thu Oct 02, 2008 3:10 pm

Well since Rezlo is down now I can't really get a price on it.

But international prices are in the region of 249 GBP

HancoB · Post by **HancoB** » Thu Oct 02, 2008 3:17 pm

That was for DevilsOwn.

The boost pipes I think go for 1700 or 1800 now. I'm not to sure, phone FSR and find out.

HancoB · Post by **HancoB** » Thu Oct 02, 2008 3:20 pm

BTW these boost pipes are made to fit, not universal.

all pipes and silicone couploings and clamps are included.

Its allso designed for less lag, meaning the hot pipe diameter is smaler than the cold side!

It really does look so sweet on a sx!

Riekert · Post by **Riekert** » Thu Oct 02, 2008 3:41 pm

HancoB wrote:BTW these boost pipes are made to fit, not universal.

all pipes and silicone couploings and clamps are included.

Its allso designed for less lag, meaning the hot pipe diameter is smaler than the cold side!

It really does look so sweet on a sx!

Prices man Prices!!!!