Injectors

HancoB · Post by **HancoB** » Sat Sep 27, 2008 10:55 am

Hi, What do you think of these injectors.

Are they worth the ching?

Has anyone had some experience with them?

http://www.autostyle.co.za/prodview.php ... dstr=&str=

Pinkfluffybunnys · Post by **Pinkfluffybunnys** » Sun Sep 28, 2008 6:00 am

RC in very good injectors, You will need a High flow fuel pump if you don't have one already you will also need a management system to get the fueling correct and you will need to remove your dropping resistor

HancoB · Post by **HancoB** » Sun Sep 28, 2008 7:14 am

Sounds good.

Any other suggestions???

veecee · Post by **veecee** » Sun Sep 28, 2008 7:18 am

gtr injectors are a straight fit - 450cc. not sure if they low or high impedance!

rx7 13bt injectors are a straight fit - 550cc. also not sure of impedance, but i think they low like the stock s13 ones!

HancoB · Post by **HancoB** » Sun Sep 28, 2008 7:19 am

Now we are talking VC!

Thanks bro!

Now just to source some of them.

Does anyone know?

Raptor · Post by **Raptor** » Sun Sep 28, 2008 7:22 am

I have 2 550cc rotary injectors they are high impedance injectors measures 14.3 ohms if i can remember correctly

HancoB · Post by **HancoB** » Sun Sep 28, 2008 7:22 am

I need 4...

debeerd · Post by **debeerd** » Sun Sep 28, 2008 1:19 pm

Does it take jap style or bosch type injectors ?
I've got a set of 750cc bosch type injectors...

HancoB · Post by **HancoB** » Sun Sep 28, 2008 1:27 pm

debeerd wrote:Does it take jap style or bosch type injectors ?
I've got a set of 750cc bosch type injectors...

What the hell is that? Does it come with a wing???

veecee · Post by **veecee** » Sun Sep 28, 2008 2:16 pm

its a jap car - it takes jap style injectors!

hancob - time to do some research mabroo!

Pinkfluffybunnys · Post by **Pinkfluffybunnys** » Sun Sep 28, 2008 6:20 pm

750cc bosch type injectors

This Could work, But it does depend on the pentil cap and if it can fit the rail, debeerd please take pic's for me I might be interested

You need Low Impedance injectors you can get a Set of high impedance 550cc injectors from Smart racing for R 1500.

gtr injectors are a straight fit - 450cc. not sure if they low or high impedance!

Low Impedance

rx7 13bt injectors are a straight fit - 550cc. also not sure of impedance

High IMpedance only some rare 13B had the purple top low impedance 550cc

veecee · Post by **veecee** » Sun Sep 28, 2008 6:29 pm

i've had a look at the german/bosch style injectors. i think you would need some fuel rail mods to make them work - also i think they longer than jap style ones!

the pintels are way different too so you would probably need some sort of custom o-ring at the cylinder head!

oh that reminds me - when i was looking for injectors a salesman at one of the well known RC resellers, told me that they can send the bosch style injectors away to me modified to fit jap style rails. dunno how reliable that would be though - or whether you would get to keep that RC guarantee?

debeerd · Post by **debeerd** » Sun Sep 28, 2008 9:40 pm

The bosch one are bigger on both sides with thick orings.
Yours has thin orings with smaller ends.
Dunno about modding them though

HancoB · Post by **HancoB** » Sun Sep 28, 2008 10:54 pm

So French cars come with French injectors????

And Italian with Italian injectors....

Uhm...thats a load of junk man.

Do you have any idea how many bosch parts we have on a sx and that is german, now you wanna come and call it jap???

veecee · Post by **veecee** » Mon Sep 29, 2008 5:20 am

sounds to me like you're being a doos for the sake of being a doos wanko!!!

and i'm with debeerd on this one.

there are only 2 basic styles of aftermarket injectors that i came across when i was looking for my car!!! and they were described either as jap style or bosch style.

hmmmm - there might've been a third called subaru-style (but i cant remember properly)!!!