CAMS

AR 200SX · Post by **AR 200SX** » Sun Mar 02, 2008 3:40 pm

JIP.EXCEPT TEASERS. I TOOK THE CAMS OUT AND THE ROCKERS DOESN'T LOOK TO GOOD.AND THE LIFTERS HAD SOME SHAVING.ANY CHANCE I'L GET SOME NEW ONES?

MyPRodOL · Post by **MyPRodOL** » Mon Mar 03, 2008 7:14 am

I have stock cams for sale...

make me an offer, not to sure what they would go for, could ask my tuner/builder what he reckons.

AR 200SX · Post by **AR 200SX** » Sun Mar 09, 2008 9:25 pm

THANX GUYS I FOUND A COMPLETE SR20 N/A HEAD FOR R3000.INLET MANIFOLD,INJECTORS,DIZZY,VALVES,LIFTERS AND CAMS. BUSY FITTING THEM AND NEED TO MAKE THE HOLE BIGGER FOR THE VVT CAM SPROCKET.EVERY THING ELSE SEEMS THE SAME AND CAMS ARE IN A VERY GOOD NICK. O AND I FOUND A NICE WAY OF BLEEDING THE LIFTERS,ALL OF THEM TOOK ABOUT 5MIN.LOL

veecee · Post by **veecee** » Mon Mar 10, 2008 9:54 pm

so why not TURN OFF THE CAPS LOCK and share the info with us, instead of keeping us in suspenders!!!???

AR 200SX · Post by **AR 200SX** » Tue Mar 11, 2008 8:35 pm

sorry my bad.lol. easy just use a plastic syringe and block the hole on the side,then inject oil in front hole until you can't press the top of the lifter with your hands.and then whala.

veecee · Post by **veecee** » Wed Mar 12, 2008 9:12 am

sounds like a plan!

it took me about an hour, maybe an hour and a half, to bleed all 16 lifters properly. my thumb was quite tired and sore afterward - and i dont think all that oil is good for the skin!

widowmaker · Post by **widowmaker** » Wed Mar 12, 2008 7:32 pm

ask the experts at teazers!
they have nipples and autobleeders