Immobiliser not switching on

mono · Post by **mono** » Thu Jan 24, 2008 10:46 am

Hey Guys

My immobiliser dont come on anymore for some reason anyone know where the override is. Alarm works but fuel dont come on anymore after clicking the alarm for immobiliser.

Anyone had this problem or any advice on it.

Vlade · Post by **Vlade** » Thu Jan 24, 2008 11:33 am

You've broken it

veecee · Post by **veecee** » Thu Jan 24, 2008 11:41 am

dammned cat pictures.

Ero_sennin · Post by **Ero_sennin** » Thu Jan 24, 2008 4:39 pm

I agree

that cat, its broken.

Puls0nic · Post by **Puls0nic** » Thu Jan 24, 2008 6:33 pm

Err... do I dare even...?

its.....

Toby · Post by **Toby** » Fri Jan 25, 2008 6:58 am

My old alarm did that. It turns out that there is a relay that must click when you press the remote button, but that relay was tired and didn't want to click no more. So I took the two biggest wires going into the immobiliser circuit and connected them together (after some checking to make sure I wasn't shorting out power or something), and presto! It started. So I made a manual override switch to bypass the immobiliser. Eventually, I got the whole alarm replaced.

Ero_sennin · Post by **Ero_sennin** » Fri Jan 25, 2008 8:33 am

my alarm sort off stopped working, the central locking didnt want to work anymore. The car then stood a few months anyway, while the engine got replaced etc.. and when I got it back it was working again, weird.

It happend previously before that when I fiddled under the dash, then just fiddled again and got it to work, probably a loose wire or something.