Nissan 200SX Club - South Africa

Hi Guys,

New member here. Just thought I'd upload some pics of my SX.

I got her like this about 2 years ago, The body is really nice and the interior even better, but the motor never made me feel confident.

I fitted a custom 76mm exhaust, made by a friend of mine. It's a full 76mm system apart from the
down pipe, as I'm still running the stock turbo. I daily drove it for about 8 months and had a weird fueling issue that took me about 4 months to sort out.
I finally figured it our and fixed it, then this happened,

That caused this to happen, I was ticked off, but I was planning on rebuilding the motor some time anyway, so I took it as a sign.
A complete rebuild followed, with a few added improvements. This is a 80% done pic , I also added some gauges (not pictured is my AEM wideband on the A-pillar) Here's a competed engine bay pic as she stands now. I stared her last week and drove her in nice
and hard. Everything looks and feels great! Also fitted my new wheels that I've been keeping in my spare room
This is as she stands now,

Two more pics, just because Thanks for watching

love it

wanneer kom kuier jy? ek het gewonder wanneer die kar gaan ry...

Looking awesome dude!!

Sent from my GT-I9500 using Tapatalk

Looks awsome man very clean, love the wheels, what are the specs?

Size?
Width?
Offset?

Looking good


Sent from my GT-I9500 using Tapatalk

NICE!
Now a touch more Low / Camber

Thanks for all the kind words, appreciate it.

@PAKIMONSTER: Ek sal n draai kom maak later die week of vroeg volgende week...dalk kry dit jou motivated om jou SX te resurrect

@troopiec: The wheels are 17x9 ET30. I'm running a 5mm spacer in front cause the rim to strut clearance was only like 3mm, so now
its about 8mm. I wasn't comfortable with only 3mm clearance. I'm also running 225/45 tires, so there's a little stretch.

@DriftZ: I'm gonna go a little lower in front, but only 10mm or so. I would love to go more and add some camber, but this is going to
be my daily driver again, so don't want to go crazy. I've got Koni adjustable shocks, but still stock type springs, so I'm planning on converting
the struts to be adjustable with coilover springs, then I can go up and down as I please...just need to have these shocks serviced...

I have a few small things left to do, then she'll be done for now. I'll drive her like that for a few weeks just to make sure everything is settled
and reliable...then it'll fit my 440cc injectors and RB25 MAF. After I've tuned that and all seems good, I'll fit my bigger turbo

Looking forward to all the mods planned, but most of all...after spending 7 months working on it...I just want to drive her!

As I have said before, the coastal towns have some of the neatest SX's around. Your one looks really good.

Welcome to the forum!

Hotstuff wrote:As I have said before, the coastal towns have some of the neatest SX's around. Your one looks really good.

Welcome to the forum!

Thanks man, I was really blessed to find this one..it actually kinda found me...lol

Loving driving her again...even if it's just to work and back

Looks great bud! Did you perhaps get the mags from Cape town ? I spotted them a while back.

Skippy wrote:Looks great bud! Did you perhaps get the mags from Cape town ? I spotted them a while back.

Thanks bud, no, I bought them from a guy here in PE that imports them...if I'm not mistaken he also wholesales to other shops,
so the set you saw might have been supplied my him.

I saw your new wheels on your thread, they look good! What are the specs on your set?

Thanks man, he could be supplying to Cape Town as well.

The specs
17" 4x114pcd
38mm offset
7.5j