Fitting 6.5Inch mids in Doors
Posted: Wed Jan 02, 2013 6:05 pm
Thought i would do a quick thread on how i mounted my speakers in my doors, i got a template off the NICO club forum how to make a mounting bracket, however the speaker hole position was a bit out and the mounting bolt holes aswell and but otherwise the shape was spot on.
Cost:
R40 chipboard
R5 bolts and nuts
R5 Chipboard screws
R80 Big piece of acoustic carpet
R60 GenKem contact adhesive
Its pretty easy to make aswell, just takes some time to do the adjustments and then use a Jigsaw to cut out the templates of chipboard, make sure all is well then apply glue to the chipboard and carpet, let it dry a little for about 5-10min, then stick the carpet onto the wood and press evenly, heres some pics:
Cost:
R40 chipboard
R5 bolts and nuts
R5 Chipboard screws
R80 Big piece of acoustic carpet
R60 GenKem contact adhesive
Its pretty easy to make aswell, just takes some time to do the adjustments and then use a Jigsaw to cut out the templates of chipboard, make sure all is well then apply glue to the chipboard and carpet, let it dry a little for about 5-10min, then stick the carpet onto the wood and press evenly, heres some pics: