Nissan 200SX Club - South Africa

Hi guys,

I have a problem with drivers side electric window. it goes down fine, but it doesnt go back up. I have to fiddle with the switch for a while, push it down, then up quickly to get it to go. Is it the switxh or something else thats faulty?

new relay box or dry joints need to be re solderd or clean contact points(in the relay box), had same problem, took it apart cleand the two switch contact points with 800 sandpaper and working 100%.

Thanks will give it a try, which relay box is it in?

in the door there is a black box

Ok cool. gona take it apart now and check it out. Thanks

Stripped it. The relay box doesnt click on the up movement. eventually it does and the window goes up. any ideas how much the new relay is?

Dont buy a new one, open that one and check it first

How do u open it. It looks like a sealed unit?

Its your window switch that is making kak strip that and use sand paper to clean the contacts

Well i opened both up and cleaned them out with sandpaper and an electronic cleaner spray, still no joy. Going to have to look at replacing them. I will test a second hand one first and see which is faulty

Try a new(second hand) relay, i dont think its the switch

new box lol they are gold if you find them
like Grant said solder all joints even if they look good solder them
the capacitors legs break loose and you dont always see it

if you want to buy one
http://www.ebay.com.au/itm/89-94-Nissan ... 3cc2bed332
http://www.ebay.com.au/itm/nissan-s13-s ... 3f1528f4c4

Are both sides not working or just the one

Its just the drivers side door that doesnt work. The passenger window works perfectly