Page 1 of 1
SR stuff
Posted: Sun Dec 04, 2011 4:52 pm
by phoenix s14
Hey all,
anyone have a good S14 SR head+all caps (no cracks, stripped bolt holes - good nick) , S14 Crank (uncut, no spun bearings - good nick)
Anyone know where I can get a set of forged pistons (86.5) for a good price?
Thanks.
Re: SR stuff
Posted: Sun Dec 04, 2011 6:13 pm
by aep886
86.5? why not go 87? for the same price!
Re: SR stuff
Posted: Sun Dec 04, 2011 6:47 pm
by phoenix s14
cause I would not do that on the stock sleeves. If I do fit 87's I would do a 2.1 resleeve with proper sleeves etc. which is much more expensive.
Re: SR stuff
Posted: Sun Dec 04, 2011 8:40 pm
by aep886
Trust me you can do 87mm on stock sleeve, i did it on my S15 block! but the sleeve is going to be very thin! if you go over 87mm then recommend darton sleeve or HKS item!
Re: SR stuff
Posted: Sun Dec 04, 2011 9:16 pm
by Grobblere
You can run up to 88mm on a highly tuned NA SR, so 87mm should be fine,
Let me know if you got right, i also sent a couple of companies a request for a quote for Sr20 Forged pistons 87mm.
Re: SR stuff
Posted: Mon Dec 05, 2011 7:18 am
by mario_200sx
We bought our sleeves, pistons and rods for the Pulsar for R13k, got it in from america.
Cant remember the name of the top of my head.
Went with Darton sleeves, CP 90mm pistons and manley rods