S13 RB25 Back From The Dead......
Moderators: P3g4sus, Daniel, rat, Draco, Riekert
Right.. so its getting mapped at the moment, we couldnt get it started the week after the last video.
Outcome:
Coils out by 120 degrees and no earth on the motor
Starts first time now! yay! Raised the back of the bonnet.. not sure about this just yet.
Problems with mapping it though, rich, then lean, then fine- culprit, faulty air and water sensors.. waiting on stock. Hopefully it will all be perfect soon.
We installed the new Bosch 044 pump and removed the old "whine-bro".. i love the turbosmart FPR - work of art!!
Sergio from Docs Tech does all the mapping. Genius! Docs Technologies / mail: info@docstech.co.za
Outcome:
Coils out by 120 degrees and no earth on the motor
Starts first time now! yay! Raised the back of the bonnet.. not sure about this just yet.
Problems with mapping it though, rich, then lean, then fine- culprit, faulty air and water sensors.. waiting on stock. Hopefully it will all be perfect soon.
We installed the new Bosch 044 pump and removed the old "whine-bro".. i love the turbosmart FPR - work of art!!
Sergio from Docs Tech does all the mapping. Genius! Docs Technologies / mail: info@docstech.co.za
Right so heres where we stand.
Sergio spent many hours tapping the inlet manifold and fitting a air temp sensor, redoing all the injector and wiring to coils, changing the water temp sensor etc, after all that we got stable readings on the dyno.. he mapped it and was happy with the results.
Dyna Pack - Hub Dyno, which btw is very stingy on numbers!
1.28 bar at 7200 rpm is producing 390kw at the wheels! and 570nm of torque
Sergio reckons at 1.7 or so we should be making 450kw on his dyno, which would equate to around 500kw on a Hyper Power etc..
Very happy, the cars a beast!
Only problem now is a slipping clutch, but i have a feeling that some oil has spilled onto it during the transplant etc.
Sergio spent many hours tapping the inlet manifold and fitting a air temp sensor, redoing all the injector and wiring to coils, changing the water temp sensor etc, after all that we got stable readings on the dyno.. he mapped it and was happy with the results.
Dyna Pack - Hub Dyno, which btw is very stingy on numbers!
1.28 bar at 7200 rpm is producing 390kw at the wheels! and 570nm of torque
Sergio reckons at 1.7 or so we should be making 450kw on his dyno, which would equate to around 500kw on a Hyper Power etc..
Very happy, the cars a beast!
Only problem now is a slipping clutch, but i have a feeling that some oil has spilled onto it during the transplant etc.
thx, will have graph up soonRB25SX wrote:Very nicedialate wrote:Dyna Pack - Hub Dyno, which btw is very stingy on numbers!
1.28 bar at 7200 rpm is producing 390kw at the wheels! and 570nm of torque
Sergio reckons at 1.7 or so we should be making 450kw on his dyno, which would equate to around 500kw on a Hyper Power etc..
It's going to be used for drifting.. I might go 10 or 10.5 wide rota drifts and then run a stretched 225 tyre and big camber to make it have proper hard looking stance....nirvash wrote:i can imagine, i wonder if it could be likened to my standardish RB with my 195mm standard tyre's
are you planning on running bigger rubber in the future?
Perfect for drifting! 265 / 285 semis for track work will have to do!