Project VenomZR

RB25SX · Post by **RB25SX** » Sat Feb 06, 2010 9:39 am

VeNoMiZeR wrote: gunna strip and order a ajusa headgasket and arp head studs hope that will solve the problem..

I also use a ajusa head gasket and ARP bolts on my RB30DET, and it holds up fine to 1.2 bar. They have gone 1.5 bar on those gaskets, with RB30. (R550 from masterparts)

Lindt · Post by **Lindt** » Mon Feb 08, 2010 7:44 am

VeNoMiZeR wrote:Drove 400km with the z and the sh!t toyota broke.. blew headgasket after block is o'ringed.. gunna strip and order a ajusa headgasket and arp head studs hope that will solve the problem..

adjuza works wonders, we all used them on the 7m's. Even up to 2bar boost they hold.

Just one thing, don't use the manual's torque settings, it's way way too low.

Highboost · Post by **Highboost** » Mon Feb 08, 2010 1:33 pm

Hey dude sorry to hear of your misfortune

I had simmilar problems with a 7MGTE

If your intrested you can buy my 7mgte bottom end ( 2 melted arias pistons 4 still in good nick), R154 supra G/box, flywheel, 2x heads with
cams 3x sets of tappet covers , 2x turbo manifolds, 2x intakes with throtle
bodies, 1 x distributor modified to use hall sensor PLUS A SET OF ARP headbolts.

PM me, its a bargain.

Trance101 · Post by **Trance101** » Mon Feb 08, 2010 2:06 pm

Sorry to hear that Venom, hope you can get it sorted soon.

Draco · Post by **Draco** » Tue Feb 09, 2010 6:57 am

Seems murphy is having his fun again....don't worry, you will be boosting soon....

VeNoMiZeR · Post by **VeNoMiZeR** » Sat May 29, 2010 5:21 pm

After removing the head and found the gasket blew on numerous places, ive opted for a Ajusa steel headgasket.. after months of search for one found one lol

now just need my ARP studs then i can assemble again..

Soon boosting 1.0bar

VeNoMiZeR · Post by **VeNoMiZeR** » Wed Jun 02, 2010 6:44 pm

some parts i got to help lol, hope this time it wouldnt blow headgasket

Trance101 · Post by **Trance101** » Thu Jun 03, 2010 11:52 am

Awesome, I hope you can get it running strong again soon.

VeNoMiZeR · Post by **VeNoMiZeR** » Thu Jun 03, 2010 6:46 pm

thanx buddy.. now to get the boost controller from Reece.. and turn up the boost

VeNoMiZeR · Post by **VeNoMiZeR** » Wed Jun 16, 2010 10:11 am

So i bought the controller from Reecez going to assembly the head and get it running this weekend if all goes to plan..

VeNoMiZeR · Post by **VeNoMiZeR** » Tue Jul 06, 2010 10:04 pm

got a update... Got the ZR up and running again! Yay this time im hoping it would last. Ajusa headgasket, ARP studs, and decent torque of headbolts.
Still running on 0.7bar boost.. will put the boost controller in this weekend and play around to bout 1.0bar boost

Tempretures are much better boosting going to 90degrees celcius and cooling down again.

Will take some pictures of interior this weekend once controller is fitted...

Draco · Post by **Draco** » Wed Jul 07, 2010 7:31 am

Sounds good....I miss the Z....

VeNoMiZeR · Post by **VeNoMiZeR** » Wed Jul 07, 2010 8:54 pm

hey ja ek sien da plek hom verkoop an iemand in brakpan

Draco · Post by **Draco** » Thu Jul 08, 2010 7:57 am

Hulle het n' shop ook daar ek dink....hulle probeur hom verkoop vir R55000 en se hy maak 350 kw

VeNoMiZeR · Post by **VeNoMiZeR** » Fri Jul 16, 2010 7:05 pm

since the 7m only lasted this time 2weeks again.. think its time to pull the motor and open it again. noticed a small water leak found that the block has cracked on the side of the cylinders after pushing out the welsh plug today