Nissan 200SX Club - South Africa

Ok so a while back there was a thread with a lot of crap on.

And please this is only for the stock s13 brakes. The 257mm and the 280mm

All I want to know is:

What cars have the same front discs as us?(and part number and where you can get it)

and what cars have the same rear discs as us?(and the part number and where you can get it)

On the front I've heard everything from a nissan maxima, almera, sentra etc etc, some need to be re-drilled to 4 hole, blah blah

Best bet, pull a disc off, go to a spares place and get them to measure it, they have a big ferodo/alfa catalog that has all the discs in it, the important measurements are the size, the offset, spigot size and thickness.

Maybe someone who has actually dont it before can shed some light.

I'm not too phased, fitting my Z32 brakes soon

I've searched long and hard before and no one could match up discs for the s13 rear or front. Front was close with a few but ultimately no direct (ignoring pcd) swaps. That's for the 280mm front.

The 257mm front can be replaced with the sentra/sabre front discs if you redrill the pcd.

That means the P11 (99 - 2002) Primera 200sti discs should be a perfect fit. It even has the 4x114.3 pcd.

And no rears????

you keep asking , and i keep telling..

read carefully... maxima 300se discs, avaidible from autozone, midas,ect.
made by alfa ( not the carmaker, aftermarket brakedisc maker) are :
280mm x 22mm ,height 49mm, spigot 68mm, 5 STUD!

s13 discs are : 280mm x 22mm, height 49mm, spigot 68mm, 4 STUD

obviously you will have to redrill for 4 stud, i have PERSONALLY used these to replace my STOCK 200sx discs..

another secret : 98' hundai elantra brake pads are virtually same size as stock s13 pads..

some more : maxima 300 QX discs are : 280mm x 28mm 5 stud.. and will work as replacement 300zx discs in a pinch..

use it, dont use it..

the alfa website : http://www.alfabrakes.co.za

alfa partnumber for the maxima discs : DR 6380

interestingly , i see they list part number DR 6742 as fitment for PRIMERA 2.0, 200SX TURBO, ALMERA 1.6,1.8

EXACTLY they right size, AND 4 stud!! if your local midas, autozone dont stock these, make em order them..

convinced now?

Nice! Shot 300!

Jip thats all good now please what about the rears???

Thats what all of us are looking for!

Oh sorry...

BTW thanks 300!

no problem.. ive never replaced rears, anybody know exactly the dimensions of the rear discs? im sure something will match them..

Does anyone have the sizes of the 300ZX rear discs??

Gary57 wrote:Does anyone have the sizes of the 300ZX rear discs??

almost exactly the same as the xtrail rear discs.

its 298mm diameter, and shit i cant remember the rest!

i think its about a 22-24mm thick.

If the 300ZX takes a 28mm disc, is it ventilated??

Anyone have a detailed drawing of one??

Only S13 brakes Please!!!!!!!

Read carefully!!!!!!!

It is kinda on topic though. I have an S13 and want to fit these brakes to my S13, so it is S13 brakes.