200SX S13 Bolt-In rollcages

[mario_200sx]

Hey guys.

Our new JIG is done, we are now ready to start selling our revised design (now sunroof friendly).

We are doing a introduction price of R5500 (normal price will be R6000). These are dash dodger cages, however if you would like a straight bar (dash will need to be cut then), just let me know.

Cage specs:
- Main hoop 45 OD & 3mm thick CDS
- Rest 38 OD & 3mm thick CDS
- 120mm x 120mm 3mm thick base plates
- 10mm bolts with minimum of ISO 8.8 rating
- 26.5 kg in total

These were cleared by MSA when Supradrift was held in Cape Town, our sponsored SX competed in the event with our cage installed.

Door bars can be done at a additional charge, but I do not promote this if car is used on the street.

cage2.JPG (55.33 KiB) Viewed 6731 times

cage3.JPG (68.03 KiB) Viewed 6731 times

cage4.JPG (50.68 KiB) Viewed 6731 times

These are perfect for track days or those that use their road cars for a bit of drifting. Takes that extra twist out of the chassis.

Only 2 spanners needed and 15-20 minutes to install.

Contact for orders:
sales@c-teq.co.za

[troopiec]

It looks really awsome, the only thing i wouldnt like to do is drill holes into my floor to mount it, any pics of the cage installed into a s13?

[mario_200sx]

It looks really awsome, the only thing i wouldnt like to do is drill holes into my floor to mount it, any pics of the cage installed into a s13?

Only other way is to weld it to your floor.

[troopiec]

How legal are they without door braces? They gave my one friend hell with his civic because his back seats were out and he had a strut bar across his c pillars, i would love a roll cage though, can you powder coat them in any color?

[mario_200sx]

There is no issues without door braces.

Yes can be powder coated in any colour.

[rat]

End of the year ill get one.

[eazye]

These Bolt in cages are Eazy 2 install took me 20min, u can immediately feel the cars rigidity improve also found the car a lot more responsive with the cage

[Gizmo]

Any Chance you could fabricate a half cage?

[mario_200sx]

Half cage can be done, no issues with that.

[PAKIMONSTER]

would you also do weld in cage kits? suppose you can do all the bends and one could just cut and weld the cage in if you wanted to.

[mario_200sx]

Weld in cage can only be done if local to Cape Town.

The bolt-in cage can be ordered and the foot plates be welded to the chassis if needed.

[mario_200sx]

Taking orders for January next year.

Some cages that headed out last week....

DREAM IT / BUILD IT / RACE IT