Page 4 of 18

Posted: Wed Jun 25, 2008 5:46 pm
by veecee
also off topic...

but i've personally drifted bruno's s13 powered by RB25det. ok it was pretty much a stock rb25det when i drove it, but it put down over 200kw's to the wheels. not sure of Nm's.

he had some front chassis stiffening done, and the car had tien basic coilovers on at the time. it was one of the easiest cars i've ever had the pleasure of throwing sideways!!! just so simple. and so much speed. i dont mean power, i mean speed. for instance, on a highway onramp we were doing 80km/h, i saw a gap and planted it. i only looked back at the clocks once we were dodging traffic going the same direction BUT coming towards us. this was because in the short distance of the freeway onramp, and a short stretch of straight tar, we were already over 220km/h. i backed off quickly when i saw the spedo!!!

as for being heavy in front. it really wasnt a problem, even with only the basic tein's on. i was immensely impressed, and had i not found such a great deal on the sr20det, i would probably still be saving for an RB25det. it really really is a great drift car!!! im sure its also a great drag car...

and i will go out there and say that with a stockish RB25det it must be one of the best EVER everyday cars - 'cept for fuel consumption! but you forget about that nonsense so quickly with a car like that!

ok back to topic!

Posted: Sun Jul 06, 2008 1:04 pm
by RudeBoy
so, update time... started assembly of rudeboys new RB25


CP pistons on Eagle rods:

Image

Image

ACL race bearings and ARP studs:

Image

Image

Tomei oil pump drive and N1 oil pump:

Image

Image

Pistons in block:

Image

Image

N1 water pump next to std (blade almost 10mm bigger)

Image

Posted: Sun Jul 06, 2008 6:26 pm
by veecee
sjoe - dis baie mooi ne'.

and that n1 water pump housing also looks a little thicker.

very very nice stuff there dude. well done...

so many pistons - they look damn nice all in a row like that!

Posted: Mon Jul 07, 2008 6:24 am
by Vlade
Jeez what compression are you gonna run?

Very nice... CP rocks, never a day of piston slap 8)

Posted: Mon Jul 07, 2008 2:21 pm
by RBSX
DUDE..........
YOH.....off the chizang

is this a 600hp job here

Posted: Mon Jul 07, 2008 2:39 pm
by RudeBoy
Vlade comp should be similar to std, std pistons hang out +_0.5mm (tx rezlo for that info) these 0.55mm so not much diff.

RBSX .. 670hp or 500kw is the target but i'd be fairly happy if we only manage 600hp...

Posted: Wed Jul 09, 2008 3:37 pm
by RBSX
600rwhp or fly

Posted: Wed Jul 09, 2008 4:26 pm
by RudeBoy
want 670rwhp and willing to boost :lol:

plus theres always the option adding some happy gas..... spent almost 5hrs file fitting the ring gaps for turbo/nos application...

if the 760cc injectors allow we'll boost the gt35 to +- 1.8bar, and if it doesnt, we'll upgrade them to 1000cc top feed with greddy top feed fuel rail and AEM or aeromotive regulators, etc, already have a walbro pump, but that can also be upgraded if need be...

can still go bigger on wtr/meth jet aswell

Posted: Wed Jul 09, 2008 8:32 pm
by Peewee
Hey RB!

There ain't no feckin way that I is getting in the suicide seat of that thing with you behind the wheel!

I will however volunteer to test pilot it for you! hehe

Posted: Wed Jul 09, 2008 9:13 pm
by RudeBoy
:lol: :lol: hey Peewee, cool that way you can compare it to your new toy

p.s why so scared??? promise i'll go slow :twisted:

Posted: Wed Jul 09, 2008 9:46 pm
by Peewee
RudeBoy wrote::lol: :lol: hey Peewee, cool that way you can compare it to your new toy

p.s why so scared??? promise i'll go slow :twisted:
Yeah .... you said that last time too.

Still think you need a few more horsies before you can compare to my new toy Dude!

Posted: Wed Jul 09, 2008 10:00 pm
by RudeBoy
[/quote]Still think you need a few more horsies before you can compare to my new toy Dude![/quote]

yea dude, i know, but it will be fun to find out how many....

Posted: Wed Jul 09, 2008 10:05 pm
by Peewee
RudeBoy wrote:
yea dude, i know, but it will be fun to find out how many....[/quote]

Guess I am going to have to go to "the Pod" to do a quarter, then we can comapre times.

How many gee gees do you need to do a 10 sec? :?:

Posted: Wed Jul 09, 2008 10:13 pm
by RudeBoy
yo Peewee, have no farken clue what "gee gees" mean, quess me no speak "pommy slang"... :lol: but i do aim to have the sx running 10's by the time you get your ass here, also hoping for it to be fairly quick over the slightly longer runs, wanna see if i can make "tom tom" read 300+

Posted: Wed Jul 09, 2008 10:17 pm
by Peewee
RudeBoy wrote:yo Peewee, have no farken clue what "gee gees" mean, quess me no speak "pommy slang"... :lol: but i do aim to have the sx running 10's by the time you get your ass here, also hoping for it to be fairly quick over the slightly longer runs, wanna see if i can make "tom tom" read 300+
Gee gees = horses.

Myself, I will take a rain check on the "tom tom trials". Let me know how it goes.