Nissan 200SX Club - South Africa

P3g4sus wrote:Well we used a winch to take it out, But struggled a bit, Being the first motor We both Pulled out of An engine bay!

It's not that difficult, but you must have someone to help. I've done it about 4 times now Once it took about 45 mins because I didn't take the gearbox out, so I was trying to line up the engine with the engine mounts as well as the gearbox. If you took the engine out with gearbox, then putting it in should be a 10 minute job, if not less. Obviously there mustn't be oil in the gearbox, and you'll need to hoist the engine + gearbox using a block and tackle or engine crane.

If you need help, let me know in advance and I can come over and help.

Thx toby, when we get there for the motor to go back, I will give you a shout!
Well I have some bad news. The build needs to take a back seat for now. I have to fix my Bakkie first. But will be going forward with the build in June!
The drifting event changed some of my idea`s So we will see what happens!

Hi everyone.

I hate it when I do this, but I dont know what I want to do! can you believe it??

Rebuild on the motor is still first priority, but then, I dont know what to do from there?

1: Drift car.
2: Drag car.
3: "Rondfok" everyday toy.
4: Show car.

Any Idea`s from you guys? Its probably not going to change my mind, but would like to see what you guys think?

I am aiming for 250rwkw on the CA18. And my plan for the car have changed so much already, and every time I "read up" on my car, my backside starts itching.

250rwkw can be done on a CA but SR would be better. Over 200rwkw CA becomes costly.

I know Rat, but I am determined, But like I said, thats not my problem, when I am done with the motor? what then?

P3g4sus wrote:I know Rat, but I am determined, But like I said, thats not my problem, when I am done with the motor? what then?

Build your car for a all rounder then untill you know

Brakes - Bigger what ever path you take this is always needed
Coilovers - something like the BC's or D2's with softer spring rates 6-4kg
Poly Bushes

Thx Rat, Will keep that in mind

Hi every one!

I have some good news and some bad news!

The bad news is:The Power rebuild of my CA18 has too wait a little bit. I have a new project car for my Girlfriend that needs first attention.

The good news is: I am searching for another CA18 or SR20 for the time being, Just so that I can Use the car. Rather SR20, Because I want to use the motor at a later stage for another car.

But I will post the motor swop, and so on.

Now I am going to rename my project: Project "Slick-Tic"

Oky, So I am going with a CA18, got the motor, just need to save up, and then I can use my car again! Wont thank the owner of the motor just yet, Dont know If he wants it public! lol!

There must be something wrong with me! I am talking to myself, And enjoying it.Too much! Must be 200SX Fever!

CA18 Rules!

Haha! Dude as long as you answer yourself back your fine... or was that if you answer yourself you lost in... mmm... hopefully the first one, otherwise I'm screwed!

Anyway! good luck with the CA! built a 800HP Beast!!

Riekert wrote:Haha! Dude as long as you answer yourself back your fine... or was that if you answer yourself you lost in... mmm... hopefully the first one, otherwise I'm screwed!

Um.... I dont know, sometimes I, No shhh!!! Dont answer it! But I wanna! Oky now I am confused!

Riekert wrote:Anyway! good luck with the CA! built a 800HP Beast!!

Will You sponsor me with some parts then Riekert?! Then I am more than willing to do it!

Hi everyone! Oky so I have excellent news! If everything goes to plan, I will be getting my replacement motor on the 10th of July!!

Just have to get the motor police clearance, then I can put it in, so hopefully It will be in by the afternoon of the 10th!

I am feeling the 200 sx fever building up!

Oky so I am getting the motor this weekend, Unforeseen problems last weekend!

So now I can do this Properly: Thx for Charl for selling me his CA! And the FMIC! Now I can get my car to work again!

So watch out, monday I may be driving my car again! altough Illegal for a few days!

It was standing the 12th of July for a year. So I am glad to be Reunited!

Also, A Big thx for Charl for all of the help he has given me so var! And Riekert Helping me aswell, Thx you guys, That is why I am proud of owning a 200SX, Guys wanting to help. Hope I can Help other people the same way one day!

One more thank you in advance, Is my Buddy Martin, Aka Scatman, That is always willing to help me with my cars, And after he had a little problem with his car last weekend!

Will take plenty of pics and adding them!

Only a pleasure.

P3g4sus wrote: One more thank you in advance, Is my Buddy Martin, Aka Scatman, That is always willing to help me with my cars, And after he had a little problem with his car last weekend!

Will take plenty of pics and adding them!

Yes buddy, always there to lose some finger skin, and show a little crack when working on your cars

Just hope my car gets sorted quickly, and that they do a good job!