Page 18 of 75
Posted: Wed Apr 20, 2011 8:03 pm
by BigKriss
smoothedgp wrote:Wil 265's fit on a 8,5j rim?

Posted: Wed Apr 20, 2011 8:41 pm
by smoothedgp
Crap.they wont fit.
Posted: Wed Apr 20, 2011 8:42 pm
by BigKriss
smoothedgp wrote:Crap.they wont fit.
Yup, you need all new "He Man" rimzzz....

Posted: Thu Apr 21, 2011 9:01 pm
by BigKriss
Ever tried transporting 4 x tyres inside an S14 ?? Eish, only just managed this today. Collected my new tyres this afternoon-KHUMO Ectasa somethings..
I have them on my Alfa GTV6 turbo. Very happy with them.
The strange and rather embarrassing thing is that driving my car today the chinese tyres were rather good ! Not bad as they initially were in the damp and wet, and bloody grippy in the dry !
The old Bridgestone`s I got the car with could happily break traction with some provocation and zip along for 50 meters or more.
The chinese stuff today broke traction for perhaps 3 meters and then howled before gripping like a bastard ! I left two black 265 wide stripes on the smooth tar and then shot off down the road.
Well, I can only hope to have the new tyres fitted on Saturday at the soonest.
Tomorrow will see what the chinese tyres are like day..

Posted: Thu Apr 21, 2011 9:09 pm
by BigKriss
On another note, the engine would continuously miss and pop at idle.
I checked everything and most of the ignition system is good. I then delved into the cas sensor on the front of the head.
Opened it up and immediately saw the problem. Now, usually this should not affect the signal except that here the chopper wheel had eaten into the trigger led.This had left a lot of dust and residue on the led .
Basically the chopper plate was bent and the high spot was touching the pickup sensor.
No biggy but enough to aggravate the phase and trigger signals..
A bit of tlc and she was back together again with revised settings on the trigger angle.
Problem solved !

Posted: Fri Apr 22, 2011 9:01 am
by neptune
i really miss this car and i had a look at a few cars to replace her with but nothing comes close. can i have her back please:-(
post a pic of the turbo gtv enginebay
ps u ur avatar is huge
Posted: Fri Apr 22, 2011 4:35 pm
by BigKriss
"ps u ur avatar is huge"
I know....lekka hey..
Remember the Lexus V8 Turbo destined for this car ? On the back burner for now..just ordered my GT3071R for the RB..Thanks John..He lurks here.
The Lexus has CP pistons, Argo Rods, Van der Linde heads and cams, Garrett TO4z turbo, Tial 60 mm waste gate.....Some nice goodies..
Posted: Sat Apr 23, 2011 1:25 pm
by POWDER
Dang BK, gonna be rough trying to keep the tires grippin cuz..... Can't wait to see it go.... And don't stress, won't ask for a ride, wanna keep my jocks white......
By the way, what the hell u want so much power for? Dang.... Pure trac car?
Posted: Wed Apr 27, 2011 6:22 pm
by poizen
Well this is the first s14 that I've ever seen and its beautiful wow pictures don't do it justice
Barry you got a wild machine and I know with your skills it will be a lot better
Keep up the great work
Posted: Thu Apr 28, 2011 4:54 pm
by BigKriss
Cheers bud, using my cell as a modem here and it works ! Going to be expensive.
Damn, these Dbn. boys can organize a damn good run ! We all met up at Gary`s spot and then followed the manne to Innanda dam. Awesome, awesome roads there ! Really tested the little Nissan and showed up serious flaws in the handling dept.
One hell of a day though..thanks guys !
Met a stack of guys from Kzn this week, this morning it was Rat`s turn in Uvongo ! Tomorrow morning we getting together again to play cars !!
Went over to Poizns possie to check out his car as well !
Really having a good time down here..
Will load a ton of pics next week when Im back on adsl..

Posted: Thu Apr 28, 2011 5:55 pm
by RudeBoy
GT30 = too small for RB , but if you really want 30 then at least 3076
nice specs on the 1uz - wanna sell? need new motor for my colt
BigKriss wrote:"ps u ur avatar is huge"
I know....lekka hey..
Remember the Lexus V8 Turbo destined for this car ? On the back burner for now..just ordered my GT3071R for the RB..Thanks John..He lurks here.
The Lexus has CP pistons, Argo Rods, Van der Linde heads and cams, Garrett TO4z turbo, Tial 60 mm waste gate.....Some nice goodies..
Posted: Fri Apr 29, 2011 8:48 am
by RB25SX
RudeBoy wrote:GT30 = too small for RB , but if you really want 30 then at least 3076
+1
Posted: Sat Apr 30, 2011 6:32 pm
by BigKriss
An awesome run was organized by the Dbn. guys for us visiting this last week.
Some of the best roads were chucked at us and it was absolute fun..ask Driftzzzz...
The Opel Turbo was behind me and I was rather chuffed that he was falling behind with every corner we took. I was the man !! Until he told me that my tires were chucking up boulders at him and that he had to take it easy !!
Damn, my self hero status took a beating right there !

Posted: Sat Apr 30, 2011 6:47 pm
by BigKriss
Met up with Rat in Uvongo yesterday and we had a bit of an impromptu piccy session.
Help the man out here guys, we need six RB25 coils for his car !!
Anyone ?
Just took a gazzilion pics of my car wherever I stopped..loved it ! I did 2456 Km this week with not as much as a hiccup from her !.

Posted: Sat Apr 30, 2011 6:54 pm
by BigKriss
RudeBoy wrote:GT30 = too small for RB , but if you really want 30 then at least 3076
nice specs on the 1uz - wanna sell? need new motor for my colt
BigKriss wrote:"ps u ur avatar is huge"
I know....lekka hey..
Remember the Lexus V8 Turbo destined for this car ? On the back burner for now..just ordered my GT3071R for the RB..Thanks John..He lurks here.
The Lexus has CP pistons, Argo Rods, Van der Linde heads and cams, Garrett TO4z turbo, Tial 60 mm waste gate.....Some nice goodies..
Mmmm, yea, for big hp it is..I want response from this engine and I will still make decent krag.
BTW, It is a Gt 3076 R...recieved it today when I got back.
The response at sea level is just plain insane on the RB !.We are definitely short changed here at altitude.
I drove Rat,s RB with the GT30 and the response was tremendous for a daily...