Senshi - Project "Evangelion" Full Blown Street Drift

POWDER · Post by **POWDER** » Sat Mar 12, 2011 6:51 pm

OK, so here it is sofar

Organised that I have a timing light when I get back, so hopefully I can get the timing sorted out and she will start... HOPEFULLY

I got a definite deadline of September to have her up and running in perfect condition, meaning my WHOLE project needs to be done by then, my nephew wants to have my SX for his matric dance thing and not some cliche style limo, so duty calls.....

This means, by then I need to have
1. my Bonet roof and boot carbon wrapped, (A plan has been made and will be done)
2. the CarPC needs to be installed, (Have it, just to install it)
3. the dicktator needs to be upgraded to a USB connection (Found usb to serial adaptor to solder in)
4. THE MOTOR MUST BE DYNO'd and RUNNING !!!! (Help)
5. Hopefully I will have the suspention done, or atleast drop coils by then
6. Sound install needs to be completed (have 90% but good enough)
7. Tappet cover needs to be sprayed at least, Airbrushing will have to wait..... (Got the spray just need to lay)
8. Selectable Winking / Lazy eye lights will have to be sorted by then (Got the goodies, just need to install)
9. Skirts, front bumper and rear bumper will have to be done by then too... (Gonna take loooong)

Dang, how am I gonna get it all done in time ?

Anyone wanna help with some wrench time?

Christiaan · Post by **Christiaan** » Sun Mar 13, 2011 1:15 pm

Man, You're doing a lot of nice things on your car! The other day I replaced a lost grommet at my bonnet holder, but obviously the rubber "whatever" I used was not the right part because it disappeared. Where do I get the right grommet? Thanks, Chris

POWDER · Post by **POWDER** » Sun Mar 13, 2011 2:07 pm

Hey Chis,

Thanks cuz, ye the details are the fun part.... The grommet I used I got from Mica hardware, just make sure the inside diameter of the grommet (meaning the inside outer diameter that will seat inside the hole) is either the same size or a ball hair larger than the hole it's self. It will be really tight to fit though and you will probably swear at it a few times, but thats when you know it is right and shouldnt fall out. Inner diamiter must fit the bonet stand though....

If you want to make the trip, I might have a spare at home that I can give you, or can get u one at mega mica here....

Hotstuff · Post by **Hotstuff** » Sun Mar 13, 2011 5:42 pm

dude...
where do I sign up for some 'wrenchtime'? u know i am just a phonecall and a beer away...

btw, check out the mirrors i did for Charl...

POWDER · Post by **POWDER** » Sun Mar 13, 2011 6:02 pm

Hotstuff wrote:dude...
where do I sign up for some 'wrenchtime'? u know i am just a phonecall and a beer away...

btw, check out the mirrors i did for Charl...

And the Link???????? WHERE IS THE LINK ?!?!?!?!?!? he he he

as for the wrench time, you just did, he he he

POWDER · Post by **POWDER** » Sun Mar 13, 2011 6:08 pm

Just had a look, DANG my boi.... NICEEEEE.......

So you telling me when I get back we'z doing my mirrows, bonet, roof, boot and B pillars ?

Draco · Post by **Draco** » Mon Mar 14, 2011 7:42 am

POWDER wrote:Got a definite deadline of September to have her up and running in perfect condition, meaning my WHOLE project needs to be done by then, my nephew wants to have my SX for his matric dance thing and not some cliche style limo, so duty calls.....

Good stuff buddy....get that stuff going!!!

I already have 1 matric dance under my belt....when I had my sparkly red sx....the comments still make me smile!!!

Draco · Post by **Draco** » Mon Mar 14, 2011 7:48 am

O...and as for "wrenchtime" how about I supply the braai and stuff...bring your sx to my place, we wrench on mine and yours....while having a bbq on the side....

THEN I ALSO SHOW YOU THE OTHER WHITE SX IN MY CARPORT

POWDER · Post by **POWDER** » Tue Mar 15, 2011 8:25 am

Draco wrote:
POWDER wrote:Got a definite deadline of September to have her up and running in perfect condition, meaning my WHOLE project needs to be done by then, my nephew wants to have my SX for his matric dance thing and not some cliche style limo, so duty calls.....
Good stuff buddy....get that stuff going!!!

I already have 1 matric dance under my belt....when I had my sparkly red sx....the comments still make me smile!!!

Ye, I cant wait, only coz it's my Nephews matric dance though, If it were ready last year I'd have had a wedding under my belt already as well... Would'a bee cool.....

Draco wrote:O...and as for "wrenchtime" how about I supply the braai and stuff...bring your sx to my place, we wrench on mine and yours....while having a bbq on the side....

THEN I ALSO SHOW YOU THE OTHER WHITE SX IN MY CARPORT

YOU BASTURD !!!!! When u get the other SX? Or did I just only now hear about it and it's been there for eva?

N E Way, I have to get her driving first, once she is on the road, then yes, we can definitely make a plan....

Draco · Post by **Draco** » Tue Mar 15, 2011 9:42 am

POWDER · Post by **POWDER** » Tue Mar 15, 2011 10:13 am

And right about now you see about 20 SX members twisting thier heads to the ight to try and see your sx properly, bwha ha ha ha ha

Tell me you didn't turn your head !!! N dont lie......

Charlvdw · Post by **Charlvdw** » Tue Mar 15, 2011 10:29 am

Looks like a old mans car.

Daniel · Post by **Daniel** » Tue Mar 15, 2011 9:04 pm

Sack I want to join in on this wrench time thing, let me know when your done with those...er..3 SX's and then I'l be right over!

POWDER · Post by **POWDER** » Wed Mar 16, 2011 5:58 pm

Daniel wrote:Sack I want to join in on this wrench time thing, let me know when your
done with those...er..3 SX's and then I'l be right over!

Ha ha, this is sounding to be becoming an event, lol, might be cool if everyone who is interested, brings their SX and a mod they want to accomplish , relevant tools, then we all get together and have a wrench time day !!!! Might make for some good, and funny memories.....

Draco · Post by **Draco** » Thu Mar 17, 2011 7:35 am

POWDER wrote:
Daniel wrote:Sack I want to join in on this wrench time thing, let me know when your
done with those...er..3 SX's and then I'l be right over!
Ha ha, this is sounding to be becoming an event, lol, might be cool if everyone who is interested, brings their SX and a mod they want to accomplish , relevant tools, then we all get together and have a wrench time day !!!! Might make for some good, and funny memories.....

+1