Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Mon Aug 29, 2011 7:57 pm
Awesome man, thanks. And remember the "OBSESSION" stickers.....
Nissan 200SX Club - South Africa
Forum for owners of the Nissan 200SX in South Africa
https://forum.sxoc.co.za/
Project Track Nissan Pulsar GTiR (Baby Godzilla)
Page 8 of 14
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Fri Sep 09, 2011 3:31 pm
Some more stripping happened!
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Fri Sep 09, 2011 4:14 pm
Eish ,not a nice sight when its stripped like that 
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Mon Sep 19, 2011 10:16 am
So we got loads of work done yesterday! Spend about 7 hours stripping the to the point where it is ready for the rotiserie.
Motor is out, front and rear suspention is out. Doors are off, all windows out except the windscreen as that needs to be glass, so we will just leave it in.
Now its time for the bodywork to begin.....
Enjoy the pics!
Motor is out, front and rear suspention is out. Doors are off, all windows out except the windscreen as that needs to be glass, so we will just leave it in.
Now its time for the bodywork to begin.....
Enjoy the pics!
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Tue Sep 27, 2011 3:39 pm
Some more parts arrived:
BOV:
1000cc RC INJECTORS: Can anybody say BIG POWER!
And one MASSIVE intercooler! 300X600X.....get this 100!!!!!! One thick ass intercooler!
Been doing loads of work on the car, been cleaning off all of the sound dampening, scrubing away all of the seam sealant! What a kak job! But needs to be done for the seam welding on the car.
BOV:
1000cc RC INJECTORS:
Can anybody say BIG POWER!And one MASSIVE intercooler! 300X600X.....get this 100!!!!!! One thick ass intercooler!
Been doing loads of work on the car, been cleaning off all of the sound dampening, scrubing away all of the seam sealant! What a kak job! But needs to be done for the seam welding on the car.
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Wed Sep 28, 2011 9:01 am
Can anybody tell me where I can buy heat protective stuff?
Like turbo blanket (good quality)
Thermal sleeving for pipes and wires
Gold heat reflective tape
Would prefer local company if possible at all.
Like turbo blanket (good quality)
Thermal sleeving for pipes and wires
Gold heat reflective tape
Would prefer local company if possible at all.
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Wed Sep 28, 2011 3:06 pm
Hectic moments !
You guys have really been busy hey. Some good progress there! Keep it up
Jan around the corner
You guys have really been busy hey. Some good progress there! Keep it up
Jan around the corner
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Fri Sep 30, 2011 12:05 pm
You can say that again! Hope we get done in time!
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Fri Sep 30, 2011 7:50 pm
Company is called Bestobel. In Joburg but they everything you require. I normally buy Kevlar sheets for heat shielding. from them. Fire retardant sleeving as well...mario_200sx wrote:Can anybody tell me where I can buy heat protective stuff?
Like turbo blanket (good quality)
Thermal sleeving for pipes and wires
Gold heat reflective tape
Would prefer local company if possible at all.
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Sat Oct 01, 2011 6:33 am
Thanks man, will look them up....
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Wed Oct 05, 2011 8:39 am
A nice parcel arrived today!
Exhaust manifold - 3mm stainless steel, T4 bolt pattern, exeternal wastegate
We see its a twin scroll.....eish dont know why? Hope it doesnt effect the spooling to much as our turbo isnt a twinscroll.
Manifold is very well built and very solid!
Ofcourse we had to do a mock-up to see how it looks!
And whom thought you could do a bottom mount with a GTX30!!!
Also got our newly engineerd light weight flywheel back! 4.5kg!
Its now mounted to the triple plate clutch with the new centres.
And a little toy for some welding! MIG
Exhaust manifold - 3mm stainless steel, T4 bolt pattern, exeternal wastegate
We see its a twin scroll.....eish dont know why? Hope it doesnt effect the spooling to much as our turbo isnt a twinscroll.
Manifold is very well built and very solid!
Ofcourse we had to do a mock-up to see how it looks!
And whom thought you could do a bottom mount with a GTX30!!! Also got our newly engineerd light weight flywheel back! 4.5kg!
Its now mounted to the triple plate clutch with the new centres.And a little toy for some welding! MIG
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Wed Oct 05, 2011 9:28 am
wow, nog n KLOMP werk om te doen
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Wed Oct 05, 2011 9:40 am
Hahaha.....welkom!
Guys.....say hallo to the driver and owner of the Baby Godzilla!
Guys.....say hallo to the driver and owner of the Baby Godzilla!
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Wed Oct 05, 2011 9:48 am
whatz up...
That is gonna be an absolute demon when its done... man cant wait to see the finished result....
That is gonna be an absolute demon when its done... man cant wait to see the finished result....
Re: Project Track Nissan Pulsar GTiR (Baby Godzilla)
Posted: Wed Oct 05, 2011 12:49 pm
from who or where is that beefy manufold?