Hi guys..
I am busy rebuilding my RB25..
I am in need of new valvestem seals
And I need a new idler pulley as mine is seized up..
If anyone can assist or advise..
Thanx guys
Got a kevlar timing belt and a tensioner..just need the idler..
RB25DET valvestem seals and Idler pulley needed
Moderators: P3g4sus, Daniel, rat, Draco, Riekert
- èXederoN
- Slipping Clutch
- Posts: 70
- Joined: Sun Aug 15, 2010 10:04 pm
- Car: S13
- Engine: RB
- Real Name: John Hayes
- Location: Kimberley
RB25DET valvestem seals and Idler pulley needed
2007 Audi A3 2.0TDI -Daily drive
1992 RB25SX
2011 Kawasaki KX 450 F
1995 2JZ-GTE Hilux 4x4
1992 RB25SX
2011 Kawasaki KX 450 F
1995 2JZ-GTE Hilux 4x4
Re: RB25DET valvestem seals and Idler pulley needed
Rebuild your idler pulleys for under R200 each.
Do a search here, I posted about this before.
Do a search here, I posted about this before.
- èXederoN
- Slipping Clutch
- Posts: 70
- Joined: Sun Aug 15, 2010 10:04 pm
- Car: S13
- Engine: RB
- Real Name: John Hayes
- Location: Kimberley
Re: RB25DET valvestem seals and Idler pulley needed
Thanx for the reply.
Will have a look
Will have a look
2007 Audi A3 2.0TDI -Daily drive
1992 RB25SX
2011 Kawasaki KX 450 F
1995 2JZ-GTE Hilux 4x4
1992 RB25SX
2011 Kawasaki KX 450 F
1995 2JZ-GTE Hilux 4x4
- èXederoN
- Slipping Clutch
- Posts: 70
- Joined: Sun Aug 15, 2010 10:04 pm
- Car: S13
- Engine: RB
- Real Name: John Hayes
- Location: Kimberley
Re: RB25DET valvestem seals and Idler pulley needed
Could you please direct me to the thread about rebuilding the idler as i cannot seem to find it..
Regarding the valvestem seals..ca18 use the exact same seals...just incase the question pops up again..
Regarding the valvestem seals..ca18 use the exact same seals...just incase the question pops up again..
2007 Audi A3 2.0TDI -Daily drive
1992 RB25SX
2011 Kawasaki KX 450 F
1995 2JZ-GTE Hilux 4x4
1992 RB25SX
2011 Kawasaki KX 450 F
1995 2JZ-GTE Hilux 4x4
- Charlvdw
- 200SX Maniac
- Posts: 3882
- Joined: Wed Jan 09, 2008 10:08 am
- Car: S13
- Engine: SR
- Location: Pretoria
Re: RB25DET valvestem seals and Idler pulley needed
You press the old bearing out and press a knew one in. Just be sure that the it go's in the same depth as the old one.èXederoN wrote:Could you please direct me to the thread about rebuilding the idler as i cannot seem to find it..
Regarding the valvestem seals..ca18 use the exact same seals...just incase the question pops up again..
197rwkw ,376nm