Project Robldepo (for now)
Moderators: P3g4sus, Daniel, rat, Draco, Riekert
-
- 0.2 Bar Boost
- Posts: 208
- Joined: Fri Jan 18, 2013 8:24 pm
- Car: S13
- Real Name: robert
- Location: Mindalore Krugersdorp
Project Robldepo (for now)
Here is a short story about my sx.
I bought the car about 2 years ago from a guy who thought the engine was smoked ( I won’t make you jealous with the price)
Towed the car back to my house with half the engine lying in the boot. It took Armand (AR 200SX) all of 45min to get everything back in place and he started the car, poor thing sounded like a tractor running on 2 pistons and needless to say my hart fell to the ground, because I thought here come endless trouble.
After Armand did a few tweaks and replaced the AFM the car was purring like a kitten and I’ve been driving the car for the last 2 years without any hustle.
Upon returning from the rock raceway one night doing about 130km/h on the freeway and praying we don’t die, Armand told me he is going to lower the boost to 0.3bar and the boost is not to be touched until the suspension is sorted out on the car (thanks Armand for looking out for my safety I’m too much of a loose cannon to think about that.). About 3 months ago I bought my sr20det motor and decided to sell the ca18det.
Now with the ca out of the way and all the suspension parts I got the fun can start (thanks to Rezlo and Armand for helping me get the parts)
I bought the car about 2 years ago from a guy who thought the engine was smoked ( I won’t make you jealous with the price)
Towed the car back to my house with half the engine lying in the boot. It took Armand (AR 200SX) all of 45min to get everything back in place and he started the car, poor thing sounded like a tractor running on 2 pistons and needless to say my hart fell to the ground, because I thought here come endless trouble.
After Armand did a few tweaks and replaced the AFM the car was purring like a kitten and I’ve been driving the car for the last 2 years without any hustle.
Upon returning from the rock raceway one night doing about 130km/h on the freeway and praying we don’t die, Armand told me he is going to lower the boost to 0.3bar and the boost is not to be touched until the suspension is sorted out on the car (thanks Armand for looking out for my safety I’m too much of a loose cannon to think about that.). About 3 months ago I bought my sr20det motor and decided to sell the ca18det.
Now with the ca out of the way and all the suspension parts I got the fun can start (thanks to Rezlo and Armand for helping me get the parts)
-
- 0.2 Bar Boost
- Posts: 208
- Joined: Fri Jan 18, 2013 8:24 pm
- Car: S13
- Real Name: robert
- Location: Mindalore Krugersdorp
Re: Project Robldepo (for now)
here we have the new H&R coil spring compared to the old one. cant wait for these boys to go in i got held up with shock boots and bump stops but i will assemble these this weekend
managed to find gabriel shock boots for the front with bump stops and on the left im just going to use rack ens rubbers trimmed down to fit the rear shocks.
managed to find gabriel shock boots for the front with bump stops and on the left im just going to use rack ens rubbers trimmed down to fit the rear shocks.
Last edited by robldepo on Thu Dec 18, 2014 10:37 am, edited 1 time in total.
-
- 0.2 Bar Boost
- Posts: 208
- Joined: Fri Jan 18, 2013 8:24 pm
- Car: S13
- Real Name: robert
- Location: Mindalore Krugersdorp
Re: Project Robldepo (for now)
Thanks to Armand (AR200SX) and Ian (REZLO) for helping me get all the parts i needed for the suspension.
also thanks to Armand the made me the alliminium steering coupling that a few of you guys also bought.
also thanks to Armand the made me the alliminium steering coupling that a few of you guys also bought.
-
- Administrator
- Posts: 2512
- Joined: Wed Aug 17, 2011 9:10 pm
- Car: S13
- Real Name: Jason
- Location: JHB
Re: Project Robldepo (for now)
Finally some progress! looks good dude
"I'd rather lose by a mile because I built my own car, than win by an inch because someone else built it for me"
-
- 0.2 Bar Boost
- Posts: 208
- Joined: Fri Jan 18, 2013 8:24 pm
- Car: S13
- Real Name: robert
- Location: Mindalore Krugersdorp
Re: Project Robldepo (for now)
thanks J appreciate it.
nearly had a heart attack guys. ebc yellow stuff pads for the front is R2800.00 and the rear is R800. what cheaper options do i have?
nearly had a heart attack guys. ebc yellow stuff pads for the front is R2800.00 and the rear is R800. what cheaper options do i have?
- GameBoy
- 0.1 Bar Boost
- Posts: 152
- Joined: Sat Feb 02, 2008 12:03 pm
- Car: S13
- Real Name: Roscoe
- Location: CPT
Re: Project Robldepo (for now)
Looking good....
Project : 92 Nissan 200SX - CA18DET, TD04, FMIC, 440cc Deatschwerks Injectors, KTS Coilovers, Black 17" CCW (ESM 007) Reps with blue BLOX wheelnuts, AFPR & High Flow 320LPH FP
-
- 0.2 Bar Boost
- Posts: 208
- Joined: Fri Jan 18, 2013 8:24 pm
- Car: S13
- Real Name: robert
- Location: Mindalore Krugersdorp
Re: Project Robldepo (for now)
thanks GameBoy