Z32 brakes
Moderators: P3g4sus, Daniel, rat, Draco, Riekert
-
- Administrator
- Posts: 2512
- Joined: Wed Aug 17, 2011 9:10 pm
- Car: S13
- Real Name: Jason
- Location: JHB
Z32 brakes
Hi guy what will i need to change to do this upgrade and how much does a conversion like this cost?
"I'd rather lose by a mile because I built my own car, than win by an inch because someone else built it for me"
- Drillergy
- SX Forumholic
- Posts: 2078
- Joined: Fri Sep 21, 2007 10:18 am
- Car: S13
- Engine: SR
- Real Name: Darryl
- Location: Midrand
- Contact:
Re: Z32 brakes
Im busy with this upgrade.
Im only doing the fronts though.
Its basic bolt on.
You will need...
Calipers.
Seal kit if it was not used for a while
check pistons, replace if pitted
S13/Z32 braided brake lines
Murano disks re drilled to 4x114
and that should be it.
Make sure all pins, anti rattle clips and stuff is on the calipers.
Im only doing the fronts though.
Its basic bolt on.
You will need...
Calipers.
Seal kit if it was not used for a while
check pistons, replace if pitted
S13/Z32 braided brake lines
Murano disks re drilled to 4x114
and that should be it.
Make sure all pins, anti rattle clips and stuff is on the calipers.
-
- Administrator
- Posts: 2512
- Joined: Wed Aug 17, 2011 9:10 pm
- Car: S13
- Real Name: Jason
- Location: JHB
Re: Z32 brakes
thanks dude how much has it cost you?
"I'd rather lose by a mile because I built my own car, than win by an inch because someone else built it for me"
- Drillergy
- SX Forumholic
- Posts: 2078
- Joined: Fri Sep 21, 2007 10:18 am
- Car: S13
- Engine: SR
- Real Name: Darryl
- Location: Midrand
- Contact:
Re: Z32 brakes
Hey man it cost me around R5.5k.
but you can get I done for around R3k
but you can get I done for around R3k
- nirvash
- 1.0 Bar Boost
- Posts: 1082
- Joined: Tue Jan 12, 2010 9:38 pm
- Car: S13
- Real Name: Andreas
- Location: Cape Town
Re: Z32 brakes
like said here, its simple bolt onDrillergy wrote:Im busy with this upgrade.
Im only doing the fronts though.
Its basic bolt on.
You will need...
Calipers.
Seal kit if it was not used for a while
check pistons, replace if pitted
S13/Z32 braided brake lines
Murano disks re drilled to 4x114
and that should be it.
Make sure all pins, anti rattle clips and stuff is on the calipers.
costing me atm R5k for front and rear calipers and used disks,
just need to get s/s lines and pads now, possibly rebuilt kits to
Time to nut up or shut up. RB25DET S13 (sold)
Current. CA18DET S13
Current. CA18DET S13
Re: Z32 brakes
Where are you getting front & rear calipers and discs for R5k?
S13 CA18DET, NIStune and...oh wait no that's gone.....
- rat
- Administrator
- Posts: 5378
- Joined: Sat Jun 30, 2007 10:38 am
- Car: R32
- Engine: RB
- Real Name: Rat
- Location: Margate
Re: Z32 brakes
+1Enzio wrote:Where are you getting front & rear calipers and discs for R5k?
Hot Plates are Sexy
- nirvash
- 1.0 Bar Boost
- Posts: 1082
- Joined: Tue Jan 12, 2010 9:38 pm
- Car: S13
- Real Name: Andreas
- Location: Cape Town
Re: Z32 brakes
from white fang on the forum, of his skyline i think, got the fronts and look in good condition, just need to pay for the rears stillEnzio wrote:Where are you getting front & rear calipers and discs for R5k?
Time to nut up or shut up. RB25DET S13 (sold)
Current. CA18DET S13
Current. CA18DET S13