PP XMS 3 Miss on pulling away
Moderators: P3g4sus, Daniel, rat, Draco, Riekert
-
- SX Forumholic
- Posts: 1718
- Joined: Tue Aug 01, 2006 4:00 pm
- Car: S13
- Engine: SR
- Location: Will always be called Pretoria
- Contact:
PP XMS 3 Miss on pulling away
As the tittle says, my sx misses upon pulling off from stand still at light throttle. What would I need to tune to fix this?
SONY Xplod inside
SR20DET Powered Red RS13
SR20DET Powered Red RS13
Re: PP XMS 3 Miss on pulling away
My bet would be it's lean there.
-
- SX Forumholic
- Posts: 1718
- Joined: Tue Aug 01, 2006 4:00 pm
- Car: S13
- Engine: SR
- Location: Will always be called Pretoria
- Contact:
Re: PP XMS 3 Miss on pulling away
hmm could be will get the laptop and give that a go!
SONY Xplod inside
SR20DET Powered Red RS13
SR20DET Powered Red RS13
-
- Administrator
- Posts: 2512
- Joined: Wed Aug 17, 2011 9:10 pm
- Car: S13
- Real Name: Jason
- Location: JHB
Re: PP XMS 3 Miss on pulling away
is perfect power a good system? how do you find it?
"I'd rather lose by a mile because I built my own car, than win by an inch because someone else built it for me"
-
- SX Forumholic
- Posts: 1718
- Joined: Tue Aug 01, 2006 4:00 pm
- Car: S13
- Engine: SR
- Location: Will always be called Pretoria
- Contact:
Re: PP XMS 3 Miss on pulling away
Not bad, has some nice features other local managements don't have. ie: AUX outputs for vvt, fans, boost controller, etc.....
Can use a O2 sensor for adjustments.
Has enough map points and each one can individually adjusted. Compensation for cold start etc... too
I think its one of the better local systems available.
I personally tho would rather recommend Apexi power FC(very very good,but not cheap) or even adding Nistune on the stock ECU. You keep all your existing sensors, no cutting and fiddling with wiring harness and you have a huge amount of options to adjust.
Stock ECU's are light years ahead of aftermarket ECU's of the amount of what it can do. So adding the ability to be able to edit the maps make them brilliant!
Can use a O2 sensor for adjustments.
Has enough map points and each one can individually adjusted. Compensation for cold start etc... too
I think its one of the better local systems available.
I personally tho would rather recommend Apexi power FC(very very good,but not cheap) or even adding Nistune on the stock ECU. You keep all your existing sensors, no cutting and fiddling with wiring harness and you have a huge amount of options to adjust.
Stock ECU's are light years ahead of aftermarket ECU's of the amount of what it can do. So adding the ability to be able to edit the maps make them brilliant!
SONY Xplod inside
SR20DET Powered Red RS13
SR20DET Powered Red RS13
-
- Slipping Clutch
- Posts: 32
- Joined: Wed Sep 09, 2015 7:23 am
- Car: S13
Re: PP XMS 3 Miss on pulling away
Who knows who tunes Apexi's on the sx's ?